Difference between revisions of "16mm Transfer Station"
From Help Wiki
(→Getting Ready) |
|||
| Line 1: | Line 1: | ||
==Getting Ready== | ==Getting Ready== | ||
| + | ===Power=== | ||
# Turn on power strip | # Turn on power strip | ||
# Start the computer | # Start the computer | ||
| − | |||
| − | |||
# Turn on the projector (Back right) | # Turn on the projector (Back right) | ||
| + | # Log into computer | ||
| + | |||
| + | ===Cleaning=== | ||
| + | # Open '''StCamSWare''' from the desktop | ||
# Turn projector to '''Still''' to turn on the light. | # Turn projector to '''Still''' to turn on the light. | ||
| − | # Look at ''' | + | # Look at '''StCamSWare''' and if the image is dirty you need to clean the projector. |
| − | # | + | # Pull the light away from the projector and clean with canned air. |
| + | |||
[[Category:Multimedia Lab]] | [[Category:Multimedia Lab]] | ||
Revision as of 16:58, 7 February 2014
Getting Ready
Power
- Turn on power strip
- Start the computer
- Turn on the projector (Back right)
- Log into computer
Cleaning
- Open StCamSWare from the desktop
- Turn projector to Still to turn on the light.
- Look at StCamSWare and if the image is dirty you need to clean the projector.
- Pull the light away from the projector and clean with canned air.
