Difference between revisions of "16mm Transfer Station"

From Help Wiki
(Getting Ready)
Line 12: Line 12:
 
# Pull the light away from the projector and clean with canned air.
 
# Pull the light away from the projector and clean with canned air.
  
 +
===Settings===
 +
# In '''StCamSWare''' go to '''Option''' > '''Settings''' and a new window will open.
 +
# Click the '''Advanced''' button in the bottom right.  If the  bottom right button is "Simple" than you are already in the '''Advanced''' window.
  
 
[[Category:Multimedia Lab]]
 
[[Category:Multimedia Lab]]

Revision as of 17:02, 7 February 2014

Getting Ready

Power

  1. Turn on power strip
  2. Start the computer
  3. Turn on the projector (Back right)
  4. Log into computer

Cleaning

  1. Open StCamSWare from the desktop
  2. Turn projector to Still to turn on the light.
  3. Look at StCamSWare and if the image is dirty you need to clean the projector.
  4. Pull the light away from the projector and clean with canned air.

Settings

  1. In StCamSWare go to Option > Settings and a new window will open.
  2. Click the Advanced button in the bottom right. If the bottom right button is "Simple" than you are already in the Advanced window.