Difference between revisions of "2D Lab Checklist"
From Help Wiki
(→Checklist) |
(→Checklist) |
||
| Line 9: | Line 9: | ||
# Sign the log book | # Sign the log book | ||
# Get artwork ready | # Get artwork ready | ||
| − | # Power on camera and lights. Make sure that the camera is set to '''Manual''' (M). | + | # Power on the camera and lights. Make sure that the camera is set to '''Manual''' (M). |
| − | # Power on the computer | + | # Power on the computer. |
| − | # Open '''Dragonframe'''. Make a new project or open an existing one. | + | # Open '''Dragonframe'''. Make a '''new project''' or open an existing one. |
| − | # Set '''Aspect Ratio''' masks | + | # Set '''Aspect Ratio''' masks. |
# Set camera settings with '''Dragonframe''' | # Set camera settings with '''Dragonframe''' | ||
| − | #* Focus the lens | + | #* Focus the lens. |
| − | #* Set exposure | + | #* Set exposure. |
# Turn off overhead lights and check for reflections. | # Turn off overhead lights and check for reflections. | ||
| − | # Animate | + | # Animate your sequence. |
# [[Exporting - Dragonframe|Export]] | # [[Exporting - Dragonframe|Export]] | ||
# Record your exit time in the log book as you leave. | # Record your exit time in the log book as you leave. | ||
[[Category:Animation Labs]] | [[Category:Animation Labs]] | ||
Revision as of 10:28, 5 October 2016
Intro
The Evergreen State College has two 2D labs on campus: the 2D Multi-Use Lab in Com 309, and the 2D Rotoscope Lab in Lib 1408. While the two labs have some differences in devices and use, the following checklist applies to both.
Checklist
Follow this checklist every time you use the lab.
Look at the Basic 2D Animation article for details on the steps below
- Sign the log book
- Get artwork ready
- Power on the camera and lights. Make sure that the camera is set to Manual (M).
- Power on the computer.
- Open Dragonframe. Make a new project or open an existing one.
- Set Aspect Ratio masks.
- Set camera settings with Dragonframe
- Focus the lens.
- Set exposure.
- Turn off overhead lights and check for reflections.
- Animate your sequence.
- Export
- Record your exit time in the log book as you leave.
