Difference between revisions of "2D Lab Checklist"

From Help Wiki
(Checklist)
(8 intermediate revisions by 4 users not shown)
Line 7: Line 7:
 
Look at the [[Basic Animation 2D - Dragonframe | Basic 2D Animation]] article for details on the steps below
 
Look at the [[Basic Animation 2D - Dragonframe | Basic 2D Animation]] article for details on the steps below
  
# Sign the log book
+
# Sign the log book.
# Get artwork ready
+
# Get your artwork ready.
# Power on camera and lights. Make sure that the camera is set to '''Manual''' (M).
+
# Power on the camera and lights.  
# Power on the computer
+
# Make sure that the camera is set to '''Manual''' ('''M''').
# Open '''Dragonframe'''. Make a new project or open an existing one.  
+
# Make sure the lens is set to '''Auto-Focus''' ('''AF''').
# Set '''Aspect Ratio''' masks
+
# Power on the computer.
# Set camera settings
+
# Open '''Dragonframe'''.  
# Focus the lens
+
# Make a '''new project''' or open an existing one.  
 +
# Set '''Aspect Ratio''' masks.
 
# Turn off overhead lights and check for reflections.
 
# Turn off overhead lights and check for reflections.
# Animate
+
# Set camera settings with '''Dragonframe''' in the '''Cinematography''' window'''.'''
 +
#* Focus the lens.
 +
#* Set exposure.
 +
#* Take a test shot
 +
# Animate your sequence.
 
# [[Exporting - Dragonframe|Export]]
 
# [[Exporting - Dragonframe|Export]]
 
+
# Back up files to Orca
 
+
# Record your exit time in the log book as you leave, along with any broken equipments and/or malfunctions.
  
 
[[Category:Animation Labs]]
 
[[Category:Animation Labs]]

Revision as of 11:25, 26 February 2020

Intro

The Evergreen State College has two 2D labs on campus: the 2D Multi-Use Lab in Com 309, and the 2D Rotoscope Lab in Lib 1408. While the two labs have some differences in devices and use, the following checklist applies to both.

Checklist

Follow this checklist every time you use the lab.

Look at the Basic 2D Animation article for details on the steps below

  1. Sign the log book.
  2. Get your artwork ready.
  3. Power on the camera and lights.
  4. Make sure that the camera is set to Manual (M).
  5. Make sure the lens is set to Auto-Focus (AF).
  6. Power on the computer.
  7. Open Dragonframe.
  8. Make a new project or open an existing one.
  9. Set Aspect Ratio masks.
  10. Turn off overhead lights and check for reflections.
  11. Set camera settings with Dragonframe in the Cinematography window.
    • Focus the lens.
    • Set exposure.
    • Take a test shot
  12. Animate your sequence.
  13. Export
  14. Back up files to Orca
  15. Record your exit time in the log book as you leave, along with any broken equipments and/or malfunctions.