Difference between revisions of "2D Lab Checklist"
From Help Wiki
| Line 1: | Line 1: | ||
| + | ==Intro== | ||
| + | The Evergreen State College has two 2D labs on campus: the '''2D Multi-Use Lab''' in '''Com 309''', and the '''2D Rotoscope Lab''' in '''Lib 1408'''. While the two labs have some differences in devices and use, the following checklist applies to both. | ||
| + | |||
| + | ==Checklist== | ||
Follow this checklist every time you use the lab. | Follow this checklist every time you use the lab. | ||
Revision as of 16:20, 21 October 2014
Intro
The Evergreen State College has two 2D labs on campus: the 2D Multi-Use Lab in Com 309, and the 2D Rotoscope Lab in Lib 1408. While the two labs have some differences in devices and use, the following checklist applies to both.
Checklist
Follow this checklist every time you use the lab.
Look at the Basic 2D Animation article for details on the steps below
- Sign the log book
- Get artwork ready
- Power on camera and lights
- Power on the computer
- Open Dragonframe. Make a new project or open an existing one.
- Set Aspect Ratio masks
- Set camera settings
- Focus the lens
- Turn off overhead lights and check for reflections.
- Animate
