Difference between revisions of "3D Lab Checklist"
From Help Wiki
(→Checklist) |
|||
| Line 1: | Line 1: | ||
===Checklist=== | ===Checklist=== | ||
Follow this checklist every time you use the lab. | Follow this checklist every time you use the lab. | ||
| − | Look at the | + | Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual] article for details on the steps below |
1. Sign the log book | 1. Sign the log book | ||
2. Get materials ready | 2. Get materials ready | ||
Revision as of 10:20, 5 October 2016
Checklist
Follow this checklist every time you use the lab. Look at the 3D Lab Manual article for details on the steps below 1. Sign the log book 2. Get materials ready 3. Power on camera and lights. Make sure that the camera is set to Manual (M). 4. Power on the computer 5. Open Dragonframe. Make a new project or open an existing one. 6. Set Aspect Ratio masks 7. Set camera settings with Dragonframe o Focus the lens o Set exposure 8. Turn off overhead lights and check for reflections. 9. Animate 10. Export
