Difference between revisions of "3D Lab Checklist"
From Help Wiki
(→Checklist) |
(→Checklist) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 4: | Line 4: | ||
Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual] article for details on the steps below | Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual] article for details on the steps below | ||
| − | + | # Sign the log book. | |
| − | + | # Get the materials ready. | |
| − | + | # Power on camera and lights. Make sure that the camera is set to '''Manual''' (M). | |
| − | + | # Power on the computer. | |
| − | + | # Open '''Dragonframe'''. Make a '''new project''' or open an existing one. | |
| − | + | # Set '''Aspect Ratio''' masks. | |
| − | + | # In the DMX window set up bash light and the DMX lights. | |
| − | + | # Turn off overhead lights and check for reflections. | |
| − | + | # Set camera settings with '''Dragonframe''' | |
| − | + | #* Focus the lens. | |
| − | + | #* Set exposure. | |
| − | + | # Animate your sequence. | |
| − | + | # [[Exporting - Dragonframe|Export]] | |
| − | * Focus the lens | + | # Back up files to Orca |
| − | * Set exposure | + | # Record your exit time in the log book as you leave. |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
[[Category:Animation Labs]] | [[Category:Animation Labs]] | ||
Latest revision as of 11:34, 20 October 2016
Checklist
Follow this checklist every time you use the lab.
Look at the 3D Lab Manual article for details on the steps below
- Sign the log book.
- Get the materials ready.
- Power on camera and lights. Make sure that the camera is set to Manual (M).
- Power on the computer.
- Open Dragonframe. Make a new project or open an existing one.
- Set Aspect Ratio masks.
- In the DMX window set up bash light and the DMX lights.
- Turn off overhead lights and check for reflections.
- Set camera settings with Dragonframe
- Focus the lens.
- Set exposure.
- Animate your sequence.
- Export
- Back up files to Orca
- Record your exit time in the log book as you leave.
