Difference between revisions of "Apollo x8 Interface"

From Help Wiki
(→‎Intro)
Line 9: Line 9:
 
* The interfaces and software were configured to work in the various labs.   
 
* The interfaces and software were configured to work in the various labs.   
 
* The Music Tech labs make use of more inputs and outputs of the interface.   
 
* The Music Tech labs make use of more inputs and outputs of the interface.   
−
* The Audio Music Benches are set up in a simlar way to make moving between labs easier.
+
* The Audio Music Benches are set up in a similar way to make moving between labs easier.
 
* Not all of the inputs and outputs are connected in the various labs.
 
* Not all of the inputs and outputs are connected in the various labs.
 +
 +
== Inputs ==
 +
* On the front there are two HI-Z inputs inputs (labelled '''HI-Z 1''' and '''HI-Z 2''')
 +
** Theses are for low level signal like electric guitars.  Only use mono 1/4 cables.
 +
* There are 4 XLR mic inputs on the back of the interface.
 +
** There is a panel with 4 XLR jacks below the interface.
 +
** These are connected to the 4 mic inputs.
 +
** Microphones can be connected to these inputs using XLR cables (not included in the room).
 +
** Each input has:
 +
*** Trim control knob for setting input levels
 +
*** Pad for reducing input levels
 +
*** 48V Phantom Power for powering condenser microphones
 +
*** Low cut filter.
 +
* There are eight 1/4" line level inputs on the back.
 +
 +
== Outputs ==
 +
* There are 8 line outputs on the back. 
 +
* Not every lab is using all 8 outputs. 
 +
 +
== Labeling ==
 +
* The various audio applications may refer to the inputs and outputs with slightly different names.
 +
* We have tried to set the preferences to meaningful names but sometimes they may revert back to the default names.  
 +
 +
=== Inputs[edit | edit source] ===
 +
{| class="wikitable"
 +
|'''Apollo Inputs'''
 +
|'''Software Labe'''l
 +
|-
 +
|Mic/Line/Hi-Z 1
 +
|Input 1
 +
|-
 +
|Mic/Line/Hi-Z 2
 +
|Input 2
 +
|-
 +
|Mic/Line 3
 +
|Input 3
 +
|-
 +
|Mic/Line 4
 +
|Input 4
 +
|-
 +
|Line 5
 +
|Input 5
 +
|-
 +
|Line 6
 +
|Input 6
 +
|-
 +
|Line 7
 +
|
 +
|-
 +
|Line 8
 +
|
 +
|-
 +
|Line
 +
|
 +
|-
 +
|AUX 1 L
 +
|
 +
|-
 +
|AUX 1 R
 +
|
 +
|-
 +
|Virtual 1
 +
|
 +
|-
 +
|Virtual 2
 +
|
 +
|-
 +
|Virtual 3
 +
|
 +
|-
 +
|Virtual 4
 +
|
 +
|-
 +
|AUX 2 L
 +
|
 +
|-
 +
|AUX 1 R
 +
|
 +
|}
 +
 +
=== Outputs ===
 +
* The '''Main''' outputs come before the line outputs.
 +
* This makes the numbering of the analog outputs confusing. 
 +
** For example analog output 1 is output 3.
 +
{| class="wikitable"
 +
|'''MOTU Outputs'''
 +
|'''Software Label'''
 +
|-
 +
|Line 1
 +
|Output 1
 +
|-
 +
|Line 2
 +
|Output 2
 +
|-
 +
|Line 3
 +
|Output 3
 +
|-
 +
|Line 4
 +
|Output 4
 +
|-
 +
|Line 5
 +
|
 +
|-
 +
|Line 6
 +
|
 +
|-
 +
|Line 7
 +
|
 +
|-
 +
|Line 8
 +
|
 +
|-
 +
|MON L
 +
|
 +
|-
 +
|MON R
 +
|
 +
|-
 +
|Virtual 1
 +
|
 +
|-
 +
|Virtual 2
 +
|
 +
|-
 +
|Virtual 3
 +
|
 +
|-
 +
|Virtual 4
 +
|
 +
|-
 +
|CUE 1 L
 +
|
 +
|-
 +
|CUE 2 R
 +
|
 +
|}
 
[[Category:Audio Mixing Benches]]
 
[[Category:Audio Mixing Benches]]

Revision as of 15:57, 15 September 2023

We have Apollo x8 interfaces installed in the four Music Tech Labs, both Audio Mixing Benches and the 5.1 room.

Intro

  • We have Apollo x8 interfaces installed in the four Music Tech Labs, both Audio Mixing Benches and the 5.1 room.
  • The are multichannel interfaces with
    • HI-Z inputs for guitars
    • Mic inputs with XLR jacks
    • Line inputs with 1/4" jacks
  • The interfaces and software were configured to work in the various labs.
  • The Music Tech labs make use of more inputs and outputs of the interface.
  • The Audio Music Benches are set up in a similar way to make moving between labs easier.
  • Not all of the inputs and outputs are connected in the various labs.

 Inputs

  • On the front there are two HI-Z inputs inputs (labelled HI-Z 1 and HI-Z 2)
    • Theses are for low level signal like electric guitars.  Only use mono 1/4 cables.
  • There are 4 XLR mic inputs on the back of the interface.
    • There is a panel with 4 XLR jacks below the interface.
    • These are connected to the 4 mic inputs.
    • Microphones can be connected to these inputs using XLR cables (not included in the room).
    • Each input has:
      • Trim control knob for setting input levels
      • Pad for reducing input levels
      • 48V Phantom Power for powering condenser microphones
      • Low cut filter.
  • There are eight 1/4" line level inputs on the back.

Outputs

  • There are 8 line outputs on the back.
  • Not every lab is using all 8 outputs.

Labeling

  • The various audio applications may refer to the inputs and outputs with slightly different names.
  • We have tried to set the preferences to meaningful names but sometimes they may revert back to the default names.  

Inputs[edit | edit source]

Apollo Inputs Software Label
Mic/Line/Hi-Z 1 Input 1
Mic/Line/Hi-Z 2 Input 2
Mic/Line 3 Input 3
Mic/Line 4 Input 4
Line 5 Input 5
Line 6 Input 6
Line 7
Line 8
Line
AUX 1 L
AUX 1 R
Virtual 1
Virtual 2
Virtual 3
Virtual 4
AUX 2 L
AUX 1 R

Outputs

  • The Main outputs come before the line outputs.
  • This makes the numbering of the analog outputs confusing. 
    • For example analog output 1 is output 3.
MOTU Outputs Software Label
Line 1 Output 1
Line 2 Output 2
Line 3 Output 3
Line 4 Output 4
Line 5
Line 6
Line 7
Line 8
MON L
MON R
Virtual 1
Virtual 2
Virtual 3
Virtual 4
CUE 1 L
CUE 2 R
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Apollo_x8_Interface&oldid=44766"

The Evergreen State College