Difference between revisions of "Audio Interface - Mixing Bench"
From Help Wiki
(Tag: VisualEditor) |
(→Inputs) (Tag: VisualEditor) |
||
| Line 91: | Line 91: | ||
|'''Software Label''' | |'''Software Label''' | ||
|- | |- | ||
| − | | | + | |Line 1 |
|Output 1 | |Output 1 | ||
|- | |- | ||
| − | | | + | |Line 2 |
|Output 2 | |Output 2 | ||
|- | |- | ||
| − | |Line | + | |Line 3 |
|Output 3 | |Output 3 | ||
|- | |- | ||
| − | |Line | + | |Line 4 |
|Output 4 | |Output 4 | ||
| + | |- | ||
| + | |Line 5 | ||
| + | | | ||
| + | |- | ||
| + | |Line 6 | ||
| + | | | ||
| + | |- | ||
| + | |Line 7 | ||
| + | | | ||
| + | |- | ||
| + | |Line 8 | ||
| + | | | ||
| + | |- | ||
| + | |MON L | ||
| + | | | ||
| + | |- | ||
| + | |MON R | ||
| + | | | ||
| + | |- | ||
| + | |Virtual 1 | ||
| + | | | ||
| + | |- | ||
| + | |Virtual 2 | ||
| + | | | ||
| + | |- | ||
| + | |Virtual 3 | ||
| + | | | ||
| + | |- | ||
| + | |Virtual 4 | ||
| + | | | ||
| + | |- | ||
| + | |CUE 1 L | ||
| + | | | ||
| + | |- | ||
| + | |CUE 2 R | ||
| + | | | ||
|} | |} | ||
[[Category:Audio Mixing Benches]] | [[Category:Audio Mixing Benches]] | ||
Revision as of 15:47, 15 September 2023
This lab has a Apollo x8 audio Interface which has multiple inputs and outputs.
Contents
Inputs
- On the front there are two HI-Z inputs inputs (labelled HI-Z 1 and HI-Z 2)
- Theses are for low level signal like electric guitars. Only use mono 1/4 cables.
- There are 4 XLR mic inputs on the back of the interface.
- There is a panel with 4 XLR jacks below the interface.
- These are connected to the 4 mic inputs.
- Microphones can be connected to these inputs using XLR cables (not included in the room).
- Each input has:
- Trim control knob for setting input levels
- Pad for reducing input levels
- 48V Phantom Power for powering condenser microphones
- Low cut filter.
- There are eight 1/4" line level inputs on the back.
- Theses are not connected to anything
Outputs
- Outputs 1 and 2 are connected to the Mackie Big Knob volume box.
- The other outputs are not being used.
Labeling
- The various audio applications may refer to the inputs and outputs with slightly different names.
- We have tried to set the preferences to meaningful names but sometimes they may revert back to the default names.
Inputs
| Apollo Inputs | Software Label |
| Mic/Line/Hi-Z 1 | Input 1 |
| Mic/Line/Hi-Z 2 | Input 2 |
| Mic/Line 3 | Input 3 |
| Mic/Line 4 | Input 4 |
| Line 5 | Input 5 |
| Line 6 | Input 6 |
| Line 7 | |
| Line 8 | |
| Line | |
| AUX 1 L | |
| AUX 1 R | |
| Virtual 1 | |
| Virtual 2 | |
| Virtual 3 | |
| Virtual 4 | |
| AUX 2 L | |
| AUX 1 R |
Outputs
- The Main outputs come before the line outputs.
- This makes the numbering of the analog outputs confusing.
- For example analog output 1 is output 3.
| MOTU Outputs | Software Label |
| Line 1 | Output 1 |
| Line 2 | Output 2 |
| Line 3 | Output 3 |
| Line 4 | Output 4 |
| Line 5 | |
| Line 6 | |
| Line 7 | |
| Line 8 | |
| MON L | |
| MON R | |
| Virtual 1 | |
| Virtual 2 | |
| Virtual 3 | |
| Virtual 4 | |
| CUE 1 L | |
| CUE 2 R |
