Aux Track for Effects

From Help Wiki
Revision as of 15:53, 29 January 2013 by Krusea (Talk | contribs) (Created page with 'Adding an aux track for an effects send # In the Project menu choose add track - Aux track. # In the Mixer window find the new Aux Track. Option click the name to change the nam…')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Adding an aux track for an effects send

  1. In the Project menu choose add track - Aux track.
  2. In the Mixer window find the new Aux Track. Option click the name to change the name.
  3. Assign the the track output to the stereo output you are using for all the tracks (Delta LR for example).
  4. Assign the input to a mono bus that is not being used. Choose New Mono Bundle then a new bus (Bus 3 for example).
  5. Insert a reverb on the aux track.
  6. Pick a audio track and choose an effect send. Assign the sends output to the bus that is feeding the Aux track (Bus 3 for example).
  7. Make sure that the send is post fader.
  8. Turn up the little send knob to send the track to the aux track.
  9. Repeat on other tracks as needed.