Difference between revisions of "Bounce to Disk"

From Help Wiki
 
(One intermediate revision by the same user not shown)
Line 8: Line 8:
 
# Make sure that automation is enabled on all track that you are automating and that nothing is muted.  
 
# Make sure that automation is enabled on all track that you are automating and that nothing is muted.  
 
# Select the '''Sequence Editor''' and  go to '''Edit > Select All'''.
 
# Select the '''Sequence Editor''' and  go to '''Edit > Select All'''.
# Go to '''Audio > Bounce to Disk'''.
+
# Go to '''File> Bounce to Disk'''.
 
# For '''File Format''' choose : '''Broadcast Wave, Interleaved'''.
 
# For '''File Format''' choose : '''Broadcast Wave, Interleaved'''.
 
# For '''Channels''' choose: '''Stereo'''.  
 
# For '''Channels''' choose: '''Stereo'''.  
 
# For '''Sample Format''' choose : 24 bit Integer'''.  
 
# For '''Sample Format''' choose : 24 bit Integer'''.  
 
# For '''Import''' choose '''Do Not Import'''.
 
# For '''Import''' choose '''Do Not Import'''.
# For Source choose the stereo output the mix is using (for example Built-in Line Output 1-2).
+
# For '''Source''' choose the stereo output the mix is using (for example Built-in Line Output 1-2).
 
# Give the file a name.   
 
# Give the file a name.   
# CLick '''Choose Folder''' to select where the file is saved.  The default should be the audio files folder for your project.
+
# Click '''Choose Folder''' to select where the file is saved.  The default should be the '''Bounces''' folder for your project.
 
# Click '''OK'''.  A window should appear showing the progress of the bounce.
 
# Click '''OK'''.  A window should appear showing the progress of the bounce.
# Always open the bounced file in another program like Peak or iTunes and listen to make sure everything is fine.
+
# Always open the bounced file in another program like Audition or iTunes and listen to make sure everything is fine.
  
 
  [[category:Digital Performer]]
 
  [[category:Digital Performer]]

Latest revision as of 17:21, 2 December 2014

Bounce to disk Bounce to disk renders the mix faster than real time into a new audio file with all effects and automation.

  1. Make sure that automation is enabled on all track that you are automating and that nothing is muted.
  2. Select the Sequence Editor and go to Edit > Select All.
  3. Go to File> Bounce to Disk.
  4. For File Format choose : Broadcast Wave, Interleaved.
  5. For Channels choose: Stereo.
  6. For Sample Format choose : 24 bit Integer.
  7. For Import choose Do Not Import.
  8. For Source choose the stereo output the mix is using (for example Built-in Line Output 1-2).
  9. Give the file a name.
  10. Click Choose Folder to select where the file is saved. The default should be the Bounces folder for your project.
  11. Click OK. A window should appear showing the progress of the bounce.
  12. Always open the bounced file in another program like Audition or iTunes and listen to make sure everything is fine.