Difference between revisions of "COM 110"

From Help Wiki
Line 1: Line 1:
<pdf width="800" height="500">File:COM117-110AV-Rack.pdf</pdf>
+
[[File:COM117-110AV-Rack.pdf]]
 
__NOTOC__
 
__NOTOC__
 
Need help? Call Media Services X 6270 for media assistance.
 
Need help? Call Media Services X 6270 for media assistance.

Revision as of 14:48, 7 April 2017

COM117-110AV-Rack.pdf

Need help? Call Media Services X 6270 for media assistance.

Exterior Wall Panel

  1. DISPLAY button turns on Projector
  2. Select your video source, HDMI or VGA
  3. Plug in your computer using either an HDMI or VGA cable
  4. Use the VOLUME control knob to adjust volume.
  5. DO NOT PLUG IN BOTH A VGA AND HDMI CABLE AT THE SAME TIME, the system will not work
  6. Note: there is a short delay in video switching (5-10 sec)

Exterior Wall Panel - Microphone Use

  1. Connect XLR cable from the microphone to the MIC input on the panel
  2. MIC UP & MIC DOWN buttons control the microphone volume
  3. Mic volume is independent of the Wall Panel Volume

AV Rack

  1. Press DISPLAY button on external AV PANEL to turn on projector
  2. Press RACK button on external AV PANEL
  3. Turn ON MAIN POWER in the AV Rack and wait 10 seconds for it to fully power up
  4. Select your video source: VGA (Laptop), DVD/VCR, BLU RAY, HDMI
  5. Insert or plug in your media
  6. On the RANE audio mixer use the AUX knob to select your audio source.

1. AUX 1 = VGA 2. AUX 2 = VCR/DVD Combo 3. AUX 3 = BLURAY 4. AUX 4 = HDMI 5. AUX 5 = CASSETTE

MAKE SURE THE AUX VOLUME AND MAIN VOLUME IS UP

Please power everything off when done & lock the AV Cabinet