Difference between revisions of "COM 326 Screening Room"

From Help Wiki
(Projector Remote)
(Projector Remote)
Line 11: Line 11:
 
#Turn on the projector  by using the Panasonic Projector Remote
 
#Turn on the projector  by using the Panasonic Projector Remote
 
#Using the projector remote  
 
#Using the projector remote  
*1. press INPUT SELECT on projector remote   
+
**a. press INPUT SELECT on projector remote   
*2. select COMPUTER IN to project all media in orange AV rack
+
**b. select COMPUTER IN to project all media in orange AV rack
*3. select HDMI 3 to project the bluray players
+
**c. select HDMI 3 to project the bluray players
  
 
===Video Sources (orange rack)===
 
===Video Sources (orange rack)===

Revision as of 16:29, 8 October 2013

COM-326-Screening-Room-AV-rack.png

This room is mostly used by the advanced moving image programs. It has an AV rack up front and in the back. It also has a 5.1 system, blu-ray, laser disc, VHS, laptop VGA cord, and audio mixer which allows you to interchange both your video and audio signals.

Power

  1. Turn on Main Power in the orange rack located in the front of the room
  2. Turn on Main Power in the short black rack located in the front of the room
  3. Turn on the ONKYO audio receiver and amplifier located in the 326A control room

Projector Remote

  1. Turn on the projector by using the Panasonic Projector Remote
  2. Using the projector remote
    • a. press INPUT SELECT on projector remote
    • b. select COMPUTER IN to project all media in orange AV rack
    • c. select HDMI 3 to project the bluray players

Video Sources (orange rack)

  1. Select your video source on the top extron switcher

VHS, DVD, Laser Disc, Computer (using VGA cable)

Audio Sources

  1. Use the RANE Audio Mixer to individually control the volume of your media sources.