Difference between revisions of "COM 326 Screening Room"

From Help Wiki
Line 12: Line 12:
 
===Using a Laptop===
 
===Using a Laptop===
  
==VGA==
+
====VGA====
 
# Turn display ‘ON’  
 
# Turn display ‘ON’  
 
# Select ‘Switcher’ source
 
# Select ‘Switcher’ source
Line 20: Line 20:
 
If image does not appear check that your computer setting are set to mirror image
 
If image does not appear check that your computer setting are set to mirror image
  
==HDMI==
+
====HDMI====
 
# Turn display ‘ON’  
 
# Turn display ‘ON’  
 
# Select ‘HDMI’ source
 
# Select ‘HDMI’ source
Line 29: Line 29:
 
===Playing a Bluray===
 
===Playing a Bluray===
  
==Playing from Bluray Rack==
+
====Playing from Bluray Rack====
 
# Turn display ‘ON’  
 
# Turn display ‘ON’  
 
# Turn on Bluray Rack power on
 
# Turn on Bluray Rack power on
Line 37: Line 37:
 
# Use the source switcher knob to adjust volume
 
# Use the source switcher knob to adjust volume
  
==Playing from Bluray in 326A==
+
====Playing from Bluray in 326A====
 
# Turn display ‘ON’  
 
# Turn display ‘ON’  
 
# Rack power in 326A should be on (if not, please turn on and leave on once finished)
 
# Rack power in 326A should be on (if not, please turn on and leave on once finished)

Revision as of 13:37, 5 April 2016

<pdf width="800" height="500">File:COM 326 AVRack.pdf</pdf>

This room is an advanced screening room for media programs.

Need help? Call Media Services X 6270 for media assistance.

Waking the Projector

  1. Press ‘ON’ on the source switcher to start the projector
  2. Turn on main power on the A/V rack, Bluray rack, Onkyo receiver (326A) and

Audio amplifier (326A)

Using a Laptop

VGA

  1. Turn display ‘ON’
  2. Select ‘Switcher’ source
  3. Select ‘Laptop’ from the switcher
  4. Connect your laptop to VGA cable
  5. Adjust the volume through the RANE mixer under ‘LAPTOP’

If image does not appear check that your computer setting are set to mirror image

HDMI

  1. Turn display ‘ON’
  2. Select ‘HDMI’ source
  3. Connect your laptop to the HDMI cable
  4. Adjust the volume through your laptop and the source switcher volume knob

If image does not appear check that your computer setting are set to mirror image

Playing a Bluray

Playing from Bluray Rack

  1. Turn display ‘ON’
  2. Turn on Bluray Rack power on
  3. Select ‘326 Bluray’ source
  4. Insert Bluray disc into Bluray player
  5. Use the Bluray remote to navigate the menu and play your selected video
  6. Use the source switcher knob to adjust volume

Playing from Bluray in 326A

  1. Turn display ‘ON’
  2. Rack power in 326A should be on (if not, please turn on and leave on once finished)
  3. Select ‘326A Bluray’ source from source switcher
  4. Insert Bluray disc into Bluray player in 326A
  5. Use the Bluray remote to navigate the menu and play your selected video
  6. Use the source switcher knob to adjust volume

Playing a DVD

  1. Turn display ‘ON’
  2. Select ‘Switcher’ source
  3. Select ‘DVD’ from the switcher
  4. Insert your disc into the DVD player and play through the menu
  5. Adjust the volume through the RANE mixer under ‘DVD’

Playing a VHS

  1. Turn display ‘ON’
  2. Select ‘Switcher’ source
  3. Select ‘VHS YC’ from the switcher
  4. Insert your VHS tape into the VHS player and press ‘Play’
  5. Adjust the volume through the RANE mixer under ‘VHS’