Difference between revisions of "COM 326 Screening Room"

From Help Wiki
(Audio Sources)
(Power)
Line 4: Line 4:
  
 
===Power===
 
===Power===
#Turn on the main power in the orange rack located in the front of the room
+
#Turn on the main power on both AV racks, orange switch.
#Turn on main power in the short black rack located in the front of the room
+
#Turn on the '''Onkyo''' audio receiver and amplifier located in the 326A control room
+
  
 
===Projector Remote===
 
===Projector Remote===

Revision as of 11:30, 27 January 2014

COM-326-Screening-Room-AV-rack.png

This room is mostly used by the advanced moving image programs. It has an AV rack up front and in the back. It also has a 5.1 system, blu-ray, laser disc, VHS, laptop VGA cord, and audio mixer which allows you to interchange both your video and audio signals.

Power

  1. Turn on the main power on both AV racks, orange switch.

Projector Remote

  1. Turn on the projector by using the Panasonic projector remote
  2. Press INPUT SELECT on projector remote
    • Select COMPUTER IN to project all media in orange AV rack
    • Select HDMI 3 to project the blu-ray player

Video Sources (orange rack)

  1. Select your video source on the top Extron switcher

VHS, DVD, Laser Disc, Computer (using VGA cable)

326-Rane-Audio-Mixer.png

Audio Sources

Orange rack:

  1. Use the Rane audio mixer to individually control the volume of your media sources that are located in the orange rack.
  2. Set the Onkyo audio receiver in the back room to 326VGA - select TV/CD on the Onkyo remote
  3. Use the Onkyo remote to control volume.

Bluray 1 and 2:

  1. Set the Onkyo audio reciever in the back room to either Bluray #1 or Bluray # 2 or select BD/DVD on the Onkyo remote.

Volume

There are 3 volumes that need to be adjusted depending on what media you are using. These 3 Main Volume controls need to be adjusted appropriately.

  • Volume on the Rane mixer
  • Volume on the Onkyo receiver in the 326A Control Room
  • Volume on your laptop