COM 408 Design Lab

From Help Wiki
Revision as of 15:30, 15 October 2013 by Vergaraz (Talk | contribs) (Created page with " ===Power=== Turn on '''MAIN POWER''' - orange switch on the top, right of rack. ===Video=== # Turn on projector by pressing the green '''DISPLAY POWER''' button for 3 - seco...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Power

Turn on MAIN POWER - orange switch on the top, right of rack.

Video

  1. Turn on projector by pressing the green DISPLAY POWER button for 3 - seconds.
  2. Select INPUT 5 using the projector remote located on the top of the rack.
  3. Select your video source: DVD, VHS, DV-DECK, LD, LAPTOP

Audio

  1. All your audio is routed through the RANE mixer.
  2. Use the individual volume knobs to control the volume of your media.
  3. The MAIN VOLUME knob should be around 2 O'Clock.
  4. Make sure the Crown Amplifier is ON located at the bottom of the rack.

Laptop

  1. Connect the VGA/audio cord to your computer.
  2. Select LAPTOP on the video switcher.
  3. Turn on the projector by pressing the green DISPLAY POWER button for 3 - seconds.
  4. Select INPUT 2 using the projector remote.
  5. Turn on your computer last or restart it if it is not projecting.

Shutting Down

  1. Press the green DISPLAY POWER button for 3 - seconds to turn off the projector.
  2. Once the projector is off, turn off the MAIN POWER of the media rack.
  3. Return remotes and VGA cord.