- 1 INTRODUCTION
- 2 Quick Exposure Settings Guide
- 3 FRONT CONTROLS
- 4 TOP CONTROLS
- 4.1 EXPOSURE MODE (Top left knob)
- 4.2 TOP MAIN DIAL
- 4.3 AF MODE
- 4.4 DRIVE
- 4.5 ISO (sensitivity to light)
- 4.6 METERING
- 4.7 LCD Dial Light
- 5 REAR CONTROLS
- 6 MENU SETTINGS
- 7 REMOTE (GA Kit)
Here is where you can find the Canon 6D proficiency test
The Canon EOS 6D is the world's smallest and lightest full-frame DSLR. It features a 20.2 Megapixel Full-Frame CMOS sensor, a wide ISO range of 100-25600 for incredible image quality even in low light, and a DIGIC 5+ Image Processor delivers enhanced noise reduction and exceptional processing speed. A new 11-point AF including a high-precision center cross-type AF point with EV -3 sensitivity allows focusing in extreme low-light conditions, and with continuous shooting up to 4.5 fps, you are ready to capture fast action. Full HD video with manual exposure control, multiple frame rates, and the benefits of a Full-Frame sensor provides stunning performance and creative flexibility.
Media Loan's other major DSLR is the Canon Rebel. Compared to the Rebel T5i, the 6D has:
- 30% better image quality
- Water sealing
- Longer battery life (2x more photos per battery charge)
- More light sensitivity - 2 f-stops
- 20% better resolution (20.9MP vs. 17.9)
There are two 6D kit options at Media Loan. The 6D kits in general access are built for photography purposes. They include:
- 1x 1:4 24-105mm lens
- 1x remote kit
- 1x battery grip
- 1x battery charger
- 1x class 10 memory card
- 3x batteries
APS has two complete Canon 6D kits that are setup for utilizing the advanced video functions of the camera. The lenses are cine, manual, and prime, with an f/1.5. The kit includes:
- 1x shoulder mount rig with follow focus and viewfinder.
- 1x 24mm lens
- 1x 35mm lens
- 1x 85mm lens
- 2x variable ND (neutral density) filters
- 2x batteries and a
- 1x plug in power supply
- 1x class 10 memory card
APS also has lighting kits available for checkout which can be found here APS Lighting Kits
Canon has some great tutorial videos on the Canon website.
CARING FOR THE CANON 6D
Media Loan has a very limited number of Canon 6D cameras. We appreciate your help in caring for this item to insure its long-term use at Evergreen.
Drop this camera
Point camera toward Sun
Submerge this camera in water
Leave this camera near a strong magnetic field!
Leave this camera in excessive heat, such as a car
Store this camera in excessive heat or cold
Use a blow dryer to blow dust from the camera
Store this camera in a location where there may be corrosive chemicals
Mount an EF-S Lens onto the body
Use excessive physical force
Please be gentle with this camera; it looks hardy, but it's delicate!
EF-S Mount lenses cannot be used with the 6D. The back of EF-S lenses extends too far back into the camera body and could damage the mirror or sensor. ONLY USE EF LENSES WITH THE 6D. All of the EF-S lenses at Media Loan are noted as such on their case, as well as on the lens itself. If you want to use any lenses other than the lens(es) that come with the kit, you need to check with the Media Loan staff.
Quick Exposure Settings Guide
There are multiple ways to adjust the shutter speed, ISO and aperture settings on the 6D. Exposure settings are shown on the bottom of the viewfinder, the bottom of the LCD screen in live view mode, and on the top right panel display. In the APS 6D kit, aperture can only be adjusted with a ring on the manual lenses.
- Q Menu: The most familiar way to adjust these is through the Quick selection button, Q. This can only be activated in photo mode when live view is off. Once activated, you can scroll through and adjust each setting accordingly.
- Exterior buttons: In either photo or video mode, with or without live view, there are exterior exposure button controls. The circular quick control dial changes the aperture and the top main dial changes the shutter speed. To adjust the ISO, turn the top dial while holding down the top ISO button.
This button is located on the opposite side of the lens release. Press this button to preview what will actually be in focus as determined by the set aperture. The viewfinder will probably get much darker, and current settings will also be displayed near the bottom. You can program this button to do other things in the C.Fn. menu. (p. 147)
To remove a lens, press the lens release button and twist the body of the lens until the red dot is on top. Now pull the lens straight out. To attach a lens, line-up the lens' red dot to the red dot on the front of the top of the lens mount, push it straight in, and twist so the red dot is as shown above. You'll hear a click, and your lens is locked-in.
Most of these adjustments can also be made with even more detail in the MENUs or with the QUICK [ Q ] CONTROL SCREEN. The power switch is on top, a new place not familiar to old-time Canon shooters.
EXPOSURE MODE (Top left knob)
Program Exposure Mode
In this mode, the 6D picks the perfect combination of aperture and shutter speed all by itself, and if you want to change them, all you need to do is move the front dial, and the 6D magically selects different combinations that still give the same exposure. In Program, also called Professional, mode, there's no need for other modes since turning the top front dial gets you right to whatever other aperture or shutter speed you might want with a minimum of fuss. Some of the menu options explained throughout this guide are deactivated in anything other than the P, Tv and Av modes.
TOP MAIN DIAL
The top, or front, dial sets many things. While shooting, it alters the exposure program (in P) or the aperture (Av mode), or the shutter speed (M or Tv modes). While playing, it usually jumps ahead or behind by 10 frames. You can set this in the playback menu. While zoomed in playback, it changes the zoom magnification.
The Lenses in the APS VIDEO KIT are manual lenses and DO NOT work with Auto Focus, but the general access lenses do. The AF system is easy, and well-set right out of the box. With most lenses, hold the camera's AF-ON button to lock autofocus after it's focused the first time. These setting apply only to real (through the viewfinder) shooting. For movies or Live View (image seen on the rear screen while shooting) settings, see the Live View Menu.
Auto/Manual Focus Switch
You select between autofocus and manual focus with this switch on your lens. They're always in this same spot, regardless of the lens. It falls right under your thumb while shooting.
Autofocus Mode Button
To set the various autofocus modes, press the AF button on the top, and turn the top dial. The settings are:
In ONE SHOT, the AF system focuses once, then locks so you can recompose if needed. Use this for photos of things that hold still
AI FOCUS automatically selects between ONE SHOT and AI SERVO. In AI FOCUS, the 6D looks at the subject, and if it holds still, locks focus as if it was set to ONE SHOT, and it it's moving, tracks it, as if it was set to AI SERVO. Use AI FOCUS most of the time, since it automatically selects what it needs to do.
In AI SERVO, the 6D continuously tracks the subject. The AF system is always focusing in and out as the subject moves around. Use AI SERVO for sports or action shots of anything that's moving.
The AF-ON button can do different things, selected in the C.Fn. menu. Even in its default setting, it will focus the lens when pressed, but here's the clever part: if the focus has locked without using the AF-ON button, when you press and hold AF-ON it works as an AF lock, holding focus for you while you recompose or do whatever else is needed.
AF-Area Mode Button
The AF-Area mode button, marked as [-|-], lets us select which of the 6D's 9 AF sensors are used, or set the 6D to use them all automatically. To select them, press the top right rear [-|-] button, and then make your selection with the Master Controls, and the top dial if you like. You can see the selection through the finder, or on the rear or top LCDs. Each works a little differently, but all make the same adjustments. If you make a selection that lights all the sensors (or reads "[ ] AF" on the top or finder LCD) then the 6D will select what sensors to use all by itself, usually the ones with the closest part of the subject under them. Letting the 6D pick (all lit) is helpful, and especially when you hand your 6D to a stranger to take your picture. The thumb controller has 9 positions, so you usually can select any AF point in just one push. You also can spin both of the dials to move your selection around. The center sensor is more sensitive than the others in dim light. If the other sensors aren't doing well in dim light, choose the center sensor and you'll be much happier.
AF Micro adjustment
Don't touch this. It's in the C.Fn. II Menu. If you have to ask how to set it, then you'll probably make it worse if you fiddle with this. If you insist on playing with it, know that only about one lens in twenty needs any adjustment, and the results are only visible at very large apertures and only under certain conditions. When you do set it, the 6D is smart enough to recall different settings for different lenses as you set them, automatically. It's often even smart enough to recognize different samples of the same lens, and it can be set for both ends of zoom lenses individually. When setting it, use natural targets like trees. Do not use tilted flat targets, since the actual location of the AF sensors is never really exactly where they are marked in the finder. To set it, you need to make many, many test shots to arrive at a setting. Every shot varies a little from shot to shot; no AF system gives the same result for each shot. Make at least 5 shots at every distance, and try every distance, since the settings can vary by distance. It's marked a in units of ±20. Numbers marked - (towards the camera icon), moves the real focus closer to us, while the + numbers (towards the mountain icon) pushes it further away.
DRIVE sets whether the 6D shoots continuously or not, and sets the self timer and remote control options. Press the DRIVE button and move the top dial to change the drive mode. The settings are:
ISO (sensitivity to light)
ISO, pronounced "eye ess oh," sets the 6D's sensitivity to light. 100 is normal, and 6,400 or higher is much more sensitive for very low light. To adjust these, press ISO and turn the top dial. AUTO ISO can be set in much more detail in the menus. The only thing we set with this button is if we're using AUTO ISO or setting a fixed ISO value.
Use the following chart to determine which metering mode you should use. Change the metering mode by pressing the meter button above the top LCD panel.
LCD Dial Light
This one's easy: tap it and the 6D lights up the top LCD in amber so you can see what you're doing.
The MENU button (top left rear) is the key to most of the detailed settings (see notes below).
Press the INFO button (next to the MENU button) with the 6D idle (tap the shutter to wake it from sleep to idle) and you'll see: Data Screen (blue and white text). Here you'll see a big list of random facts and figures. The most useful is telling you the date and time, and how much card memory you have left. If you call up this screen with the INFO button, it doesn't go away. To make this data screen go away, you have to press INFO again. Pressing INFO multiple times will display an electronic level.
This is the little wheel above the rubber eyepiece. Turn it until the finder displays become sharp. It can get knocked as you use the 6D, so if your finder gets blurry, readjust it.
To switch between movie and photo mode, turn the lever to the proper selection. For movies, you have to see the image on the rear screen to see what you're doing; you can't shoot them while looking through the optical finder. Turn the lever back to the silver camera icon to stop the rear screen display and return to still shots.
Start/Stop (Live View)
For Live View (seeing the picture on the rear LCD screen before you take it), turn the lever to your desired mode. Then press START/STOP to start and stop the rear display. Live View uses a lot of battery power. This button is also used to start/stop video recording.
The AF-ON button can do different things, as programmed in the menus. See Canon AF Settings for more.
Exposure-Lock (AEL or *) Button
The AE Lock button, curiously only marked as an asterisk (*), locks exposure. Once pressed, you'll also see an asterisk in your finder to let you know you've locked exposure. Hitting it again won't unlock the exposure; it simply relocks it again to a new value. There's no easy way to unlock this other than by taking the picture, changing the exposure mode, or letting the camera go to sleep.
AF-Area Mode Button
The AF-Area mode button, marked as [-|-], lets us select which of the 6D's 9 AF sensors are used, or set the 6D to use them all automatically.
The magnification button, marked as a blue magnifying glass, lets you magnify or reduce the image(s) seen on the rear LCD screen. During playback, press the button and use the top dial to control how far you zoom in. Turned the other way, the top dial also lets you see many smaller images on the screen at once. It also works during Live View and Movie shooting. during Live View and Movie shooting, press the button a few times to cycle among the various magnifications.
You know what the play button does. It also brings an image back to full-screen if it's been zoomed-in.
The Quick Control [Q] Button
The Quick Control [Q] button is one of the most useful buttons on the 6D, besides the shutter button. Press the [Q] and a screen loaded with settings appears. To change these settings once you get this screen, use the Master Controls to drive around, and the dial to change the setting. If you need more details about what you're setting, press the SET button again. There's no need to press OK or DONE or EXIT. The instant you've changed something, it's done. You can read and set apertures and shutter speeds on this screen, but in manual exposure mode, there is no indication for the correct exposure. For manual exposure, look at the bar graph in the finder or on the old top LCD. If you tap the INFO button, you'll call up the very similar INFO screen, which does drive the bar graph to let you set read manual exposure, but you'll have to set the shutter and aperture with the dials, not from the screen.
The master controls are what we use to juggle all the other settings. These include: the set button, the multi-controller, and quick control dial. The SET button can be programmed in the menus, and makes the 6D do whatever you just set it to do. It also selects the center or all AF points when you're setting the AF-area modes. Around the SET button is a directional control ring, called the multi-controller. It works in four directions when playing in the menus, and during zoomed playback, lets you scroll around in eight directions. Around the directional controller is the big quick control dial. It can be used to control many things. During shooting, the big rear dial is very important as it changes exposure compensation. During menus and playback the big rear dial also does a lot; try it and see. During manual exposure, it also sets the aperture. The LOCK switch only prevents the rear dial from changing the exposure compensation (or aperture in manual exposure). It doesn't lock anything else, or any other functions (like menu or playback control) of the rear dial. We can change what the LOCK switch does in the C.Fn. menu.
This is for deleting pictures. Press it, and use the master controls above to select ERASE and then press SET to delete the picture you're playing.
Access the MENU to change various camera system settings, such as video/photo resolution and formats. The MENU is organized into various tabs. You can access the video settings in the MENU when the camera is set to video mode, and the photography settings when the camera is set to photo mode. Notes on settings:
Movie Rec. Size
IPB Choose IPB for normal use. The video looks the same as ALL-I below, and take up much less space.
ALL-I Choose ALL-I only when you have huge data storage resources and need excruciating precision in frame-by frame editing for theatrical release. ALL-I is intended for the editing needs of professional tele-production and motion picture production, not for consumer use.
Format the memory card before returning your camera to Media Loan. This not only clears it for the next user, but it also ensures protection of your work. Make sure to transfer the files off of the card before you format. Select “low level format” to completely clear the information (without low level format, your data will be retrievable by certain computer programs).
This sets the analog video output to NTSC (Never The Same Color) or PAL (Problems Are Lurking). It should be set according to your country and not need adjustment. Use NTSC in the USA and Japan, and PAL in Europe.
REMOTE (GA Kit)
The General Access kit comes with a remote, and there is multiple ways to use it. With this remote, 6D does not need to be in "remote" drive mode.
Steps for usage:
- Set the remote and receiver to the same channel. On each, remove the battery cover and flip the switch up to a matching channel (typically ch. 1). These must match.
- Plug the receiver into the corresponding input on the left side of the camera body.
- Power on the receiver and the camera.
- The shooting mode can be selected with the remote as well as the camera. The most direct way to use the remote is to set the camera to single shooting drive mode, and then use the remote to select your actual desired mode (single, continuous, BULB, and timer). The BULB function can be used two ways: two take quick, continuous shots (set the remote to bulb and the drive mode on the camera to continuous) and to take long exposures (set the remote to bulb and the exposure mode on the camera to BULB). In both uses, press the remote button one to start shooting and again to stop.
- If set to AF, hold the main button on the remote down halfway to focus. Press down all the way to take a picture in single shooting and timer modes. In burst mode, keep the button pressed to take multiple shots. In BULB, press the button once to open the shutter and a second time to close it.
- After a picture is take, you can hold the remote button halfway down again for a quick preview.