Difference between revisions of "Canon Rebel T1i/T2i Operating Guide"

From Help Wiki
Line 25: Line 25:
 
On the Canon Rebel, there is a half-circle shaped button on the right side of the lens mount (viewed from the front of the camera).  To remove the lens, press this button, and turn the lens approximately 90 degrees clockwise.  To attach a new lens, find the guide mark on the lens body.  If it is an EF lens, the guide mark will be a red circle.  If the lens is EF-S, the guide mark will be a white square.  Line up the guide mark with the matching mark on the Canon rebel body, set the lens into the mount, and turn it approximately 90 degrees counter clockwise until it locks into place.
 
On the Canon Rebel, there is a half-circle shaped button on the right side of the lens mount (viewed from the front of the camera).  To remove the lens, press this button, and turn the lens approximately 90 degrees clockwise.  To attach a new lens, find the guide mark on the lens body.  If it is an EF lens, the guide mark will be a red circle.  If the lens is EF-S, the guide mark will be a white square.  Line up the guide mark with the matching mark on the Canon rebel body, set the lens into the mount, and turn it approximately 90 degrees counter clockwise until it locks into place.
  
===Auto / Manual Focus===
+
===Auto / Manual Focus Switch===
 
The Canon Rebel uses an in-lens focusing system, which is switched on and off on the body of the lens.  Regardless of the settings on the camera body, if the switch on the lens is set to MF (Manual Focus), the camera will not perform AF (Auto Focus) functions.   
 
The Canon Rebel uses an in-lens focusing system, which is switched on and off on the body of the lens.  Regardless of the settings on the camera body, if the switch on the lens is set to MF (Manual Focus), the camera will not perform AF (Auto Focus) functions.   
  
 
===Image Stabilization===
 
===Image Stabilization===
 
Some canon lenses feature an optical IS (Image Stabilization) function.  This can be useful for shooting fast-moving hand-held shots, shots in low-light environments, etc.  Because the IS is optical, it will not deteriorate the quality of the image as digital image stabilization does.  However, using the IS feature on a lens will drain the battery much faster.  Due to power consumption concerns, we recommend that the IS be turned off when shooting from a tripod, or at high enough shutter speeds that hand movement will not be a concern.  The IS controlled on the lens body, and if the lens has an IS feature, the switch will be next to the AF/MF switch next to the lens mount.
 
Some canon lenses feature an optical IS (Image Stabilization) function.  This can be useful for shooting fast-moving hand-held shots, shots in low-light environments, etc.  Because the IS is optical, it will not deteriorate the quality of the image as digital image stabilization does.  However, using the IS feature on a lens will drain the battery much faster.  Due to power consumption concerns, we recommend that the IS be turned off when shooting from a tripod, or at high enough shutter speeds that hand movement will not be a concern.  The IS controlled on the lens body, and if the lens has an IS feature, the switch will be next to the AF/MF switch next to the lens mount.
 +
 +
==Mode Dial==
 +
===A-DEP===
 +
A-DEP (Automatic DEPth of Field) mode on the Canon Rebel is designed to maximize focus across a picture, and is primarily intended for landscapes or large groups of people.  A-DEP must be used with AF turned on, as the camera will use the AF sensor array to search through the frame for the distance of all subjects, then determine aperture and shutter values to create a depth of field that will keep all subjects in focus.  A-DEP is not recommended for moving subjects, portraits, or shots where foreground and background de-focus is desired.  The only controllable exposure settings in A-DEP mode are ISO and Exposure compensation.
 +
===M===
 +
M (Manual) mode offers full control over all features on the Canon Rebel.  All exposure settings and picture styles must be changed by the user.  This allows for the most creative control over the camera, but also demands an understanding of the camera's features, and basic principals of photography.  In manual mode, the shutter speed is controlled by the dial next to the shutter release button.  Aperture is controlled by the same dial while the AV button on the back of the camera is pressed.  ISO can be set by pressing the button on the top of the camera between the Mode Dial and the Shutter Speed Dial.  While in M, you can choose Auto ISO.
 +
===Av===
 +
Av (Aperture Priority Auto-Exposure) mode is designed to let the user choose aperture values, and automatically determine shutter speed for correct exposure.  While in Av mode, the dial next to the shutter button will control the aperture.  ISO is controlled the same way as in M mode, and shutter speed is determined by the camera.  Av mode is designed to let the user control depth of field in a shot (to customize deep of shallow focus), but may not be good for high speed subjects, as the camera may use a slow shutter speed to acquire correct exposure.
 +
===Tv===
 +
Tv (Shutter Priority Auto-Exposure) mode is designed for photography where shutter speed is crucial.  In Tv mode, the shutter speed is controlled with the dial next to the shutter button.  In this mode, the user determines shutter speed, and the camera will automatically determine an aperture value for correct exposure.  ISO is controlled in the same manner as in M mode.  Tv mode is designed for applications such as sports photography, where depth of field is not particularly important, but fast shutter speeds to minimize motion blur are desired.
  
  

Revision as of 10:41, 22 March 2013

Caring for the Canon Rebel

Media Loan has a limited number of Canon Rebel T1i/T2i cameras. We appreciate your help in caring for this item to insure it's long-term use at Evergreen.

General Camera Care DO NOT:

Drop this camera
Point camera toward Sun.
Submerge this camera in water
Leave this camera near a strong magnetic field!
Leave this camera in excessive heat, such as a car
Store this camera in excessive heat or cold
Use a blow dryer to blow dust from the camera
Store this camera in a location where there may be corrosive chemicals
Use excessive physical force
Please be gentle with this camera; it looks hardy, but it's delicate!

Battery

To insert a battery into the Canon rebel, open the battery door found on the bottom of the camera by pulling on the latch and swinging the door open. The battery will slide into place and lock in. Close the battery door. The battery will only fit in one way, so if it does not seem to be working, the battery is not oriented correctly.

To charge the battery, slide it into the provided charger and then plug the charger into a standard 120 VAC outlet. DO NOT CHARGE MORE THAN 24 HRS. DO NOT USE ANY CHARGER OTHER THAN THE ONE PROVIDED WITH THE CAMERA.

When the camera is powered off, it takes several seconds to clean the sensor. Because of this, make sure that the "Sensor Cleaning" logo is no longer on the screen before removing the battery.

Battery Life

The Canon Rebel shows charge level in three stages: Battery OK, Battery Low, and Needs to be Charged. To conserve battery life, the Rebel will go into a sleep mode after a period of disuse. To wake the camera, press the shutter button down halfway. If you know you will not be using the camera, it is best to fully turn the camera off.

Canon Rebel Lenses

The Canon Rebel will accept any Canon EF of EF-S bayonet lenses. Media Loan has several different zoom and prime lenses that can be checked out alongside a Canon Rebel.

Removing and Replacing Lenses

Please do not remove the included kit lens from the camera unless you intend to attach a different lens immediately.

On the Canon Rebel, there is a half-circle shaped button on the right side of the lens mount (viewed from the front of the camera). To remove the lens, press this button, and turn the lens approximately 90 degrees clockwise. To attach a new lens, find the guide mark on the lens body. If it is an EF lens, the guide mark will be a red circle. If the lens is EF-S, the guide mark will be a white square. Line up the guide mark with the matching mark on the Canon rebel body, set the lens into the mount, and turn it approximately 90 degrees counter clockwise until it locks into place.

Auto / Manual Focus Switch

The Canon Rebel uses an in-lens focusing system, which is switched on and off on the body of the lens. Regardless of the settings on the camera body, if the switch on the lens is set to MF (Manual Focus), the camera will not perform AF (Auto Focus) functions.

Image Stabilization

Some canon lenses feature an optical IS (Image Stabilization) function. This can be useful for shooting fast-moving hand-held shots, shots in low-light environments, etc. Because the IS is optical, it will not deteriorate the quality of the image as digital image stabilization does. However, using the IS feature on a lens will drain the battery much faster. Due to power consumption concerns, we recommend that the IS be turned off when shooting from a tripod, or at high enough shutter speeds that hand movement will not be a concern. The IS controlled on the lens body, and if the lens has an IS feature, the switch will be next to the AF/MF switch next to the lens mount.

Mode Dial

A-DEP

A-DEP (Automatic DEPth of Field) mode on the Canon Rebel is designed to maximize focus across a picture, and is primarily intended for landscapes or large groups of people. A-DEP must be used with AF turned on, as the camera will use the AF sensor array to search through the frame for the distance of all subjects, then determine aperture and shutter values to create a depth of field that will keep all subjects in focus. A-DEP is not recommended for moving subjects, portraits, or shots where foreground and background de-focus is desired. The only controllable exposure settings in A-DEP mode are ISO and Exposure compensation.

M

M (Manual) mode offers full control over all features on the Canon Rebel. All exposure settings and picture styles must be changed by the user. This allows for the most creative control over the camera, but also demands an understanding of the camera's features, and basic principals of photography. In manual mode, the shutter speed is controlled by the dial next to the shutter release button. Aperture is controlled by the same dial while the AV button on the back of the camera is pressed. ISO can be set by pressing the button on the top of the camera between the Mode Dial and the Shutter Speed Dial. While in M, you can choose Auto ISO.

Av

Av (Aperture Priority Auto-Exposure) mode is designed to let the user choose aperture values, and automatically determine shutter speed for correct exposure. While in Av mode, the dial next to the shutter button will control the aperture. ISO is controlled the same way as in M mode, and shutter speed is determined by the camera. Av mode is designed to let the user control depth of field in a shot (to customize deep of shallow focus), but may not be good for high speed subjects, as the camera may use a slow shutter speed to acquire correct exposure.

Tv

Tv (Shutter Priority Auto-Exposure) mode is designed for photography where shutter speed is crucial. In Tv mode, the shutter speed is controlled with the dial next to the shutter button. In this mode, the user determines shutter speed, and the camera will automatically determine an aperture value for correct exposure. ISO is controlled in the same manner as in M mode. Tv mode is designed for applications such as sports photography, where depth of field is not particularly important, but fast shutter speeds to minimize motion blur are desired.