DELETE Physical Computing - 3D Printers

From Help Wiki
Revision as of 18:02, 10 January 2019 by Williaas (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Intro

  • For the summer 2016 quarter the 3D printers have been set up in the Library building L1523.
  • On the first floor on the Library building walk past the Multimedia Lab and take a left at the garbage/recycling area. There is a sign labeled "24-Hour Suites".
  • For more information contact Aaron Kruse, 360-867-6842 L1507.

Scheduling

  • The 3D Printer room is scheduled at Media Loan.
  • Media Loan is located at Library 2504 or you can call 360-867-6253.
  • The room is available 24 hours seven days a week but you need to schedule time and checkout the key while Media Loan is open.
  • Media Loan's summer hours are Monday, Tuesday, Thursday, and Friday 9 am - 4 pm and Wednesday 9:30 am - 5:30 pm.
  • Here is the scheduling policy.
  • There are late fees for over due keys so return the keys on time.
  • If you schedule time when the building is closed Media Loan will give you an extra key FOB to open the Library Building exterior door.

Equipment

Makerbot Replicator 2

  • There are 2 Makerbot printers. They are on carts so they can be taken to the Computing Center during class. Do not move them from the room.
  • Load you files onto the printer with the SD cards.

Lulzbot Mini

  • There is one Lulzbot Mini.
  • Load files to it with the Cura application on the computer to the right of the printer.

The Other Printer

  • There is a red 3D printer
  • Only use if you have been instructed how it works.

Computer

  • Use Cura with the Lulzbot.
  • The Makerbot software is installed if you need to convert files.
  • There is a memory card reader for loading files on to SD cards.

Notes

  • It OK to prop the door open while printing is you are in the room or in the hallway.
  • If you leave the area while printing make sure to close the door.