Difference between revisions of "Dragonframe Tether"

From Help Wiki
(Set Up Artwork)
(On the Camera)
Line 38: Line 38:
  
  
===Camera Settings===
+
Confirm the camera settings are:
====On the Camera====
+
*Set to Manual Mode ("'''M'''").
+
*Set lens to Auto Focus ("'''AF'''").
+
====Cinematography window====
+
While still in the Cinematography window confirm the camera settings are:
+
#*Picture Style - NEUTRAL
+
#*Image Quality - LARGE FINE JPEG
+
 
#*White Balance - TUNGSTEN
 
#*White Balance - TUNGSTEN
#*External Flash - OFF
+
#*Image Quality - JPG
#*Stretch - NONE
+
#*Flash - OFF
#*Exposure Preview offset - 0
+
 
#Set the ISO dial to be 100
 
#Set the ISO dial to be 100
 
[[Category:Dragonframe]]
 
[[Category:Dragonframe]]

Revision as of 09:32, 12 May 2020

Dragonframe Tether is a free app that allows you to use your iPhone, iPod Touch or iPad as a capture source in Dragonframe 4.

Getting the Apps

  • On the iOS device get Dragonframe Tether from the App Store.
  • On the computer install and authorize Dragonframe

Getting Started

  1. On the computer open Dragonframe
  2. Select Create New Scene from the dialog box, or open a previously created scene with Open Scene.
  3. Name your production, 5 characters maximum.
  4. Set the Frame Rate and click OK.
  5. In the new window that opens browse to your desktop.
  6. Click New Folder and give it a name and hit Create.
  7. Select that folder and click Save.
  8. Connect the iOS device to the computer via USB
  9. Open Dragonframe Tether on the iOS device
  10. Dragonframe should detect the back camera of the iOS device

Configuring Dragonframe

  1. If you do not see the live camera feed from the animation stand press command R to refresh the live camera feed. 
    • a red outline will appear around the window signifying that live view is enabled.
  2. Set the frames per second for playback speed:
    • 1's = 30fps 
    • 2's = 15fps
    • 3's = 10fps

Set the Aspect Ratio for the project

  1. In the Animation window, click on the Guide Layers tab. 
  2. Select Aspect Ratio Mask and choose 16:9 (rectangular),  4:3 (square) depending on the requirements for your assignment.
  3. Adjust the mask opacity as needed. 
  4. Select Aspect Ratio Lines and select Outline and/or Crosshairs as needed.
  5. In the Aspect Ratio Mask section set the Aspect Ratio to match the 16:9 or 4:3 setting above.

Set Up Artwork

  1. Arrange your artwork
  2. Adjust you lights
  3. Check for reflections

Cinematography Window

In Dragonframe, click on the camera icon  Camera icon dragonframe.png on the top right of the screen to enter the Cinematography window. 


Confirm the camera settings are:

    • White Balance - TUNGSTEN
    • Image Quality - JPG
    • Flash - OFF
  1. Set the ISO dial to be 100