Difference between revisions of "Elinchrom Studio Flash Kit Gear Guide"

From Help Wiki
(Elinchrom Studio Flash Kit Operating Guide)
 
 
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
===Overview===
+
{{Media Loan Covid Message}}
These lights brightly flash in response to taking a picture automatically. The kit works wirelessly or wired, with most cameras, like the Canon Rebels and 6D. The kit comes with 2 lights, 2 stands, remote, sync cable, hot shoe adapter and various light covers.
+
  
===Precautions===
+
<div class="container-fluid">
* To avoid potentially lethal conditions, this unit must be connected to a 3-wire grounded outlet.
+
 
* Do not operate with two-wire extension cords or use an adapter to connect to ungrounded outlets.
+
<div class="row">
* This unit contains high voltages and internal components, which can store dangerous voltages even when the unit is unplugged. The use of water around this equipment is not recommended.
+
 
* The flash-tube and modeling lamp can get extremely hot. Do not allow finger oils to contact the lamps as this can cause excess heating and premature lamp failure.
+
<div class="col-md-8">
* Do not attempt to change flash tubes (the normal bulbs are okay to replace) or disassemble the units. Please bring it back to Media Loan for maintenance.
+
 
* Before attempting to operate the unit, ensure that it is securely mounted to a light stand.
+
<div class="lead">
* Do not allow unattended children around studio flash equipment as potentially dangerous conditions may result. These dangers may include burns and electrical shock hazards as well as the possibility of falling equipment if cords are tripped over.
+
 
 +
<div class="lead">[[File:Media Loan Logo.png|left|frameless|90x90px]]A kit with two flashing lights on stands for studio photography. </div> 
 +
 
 +
<div class="pull-right"></div>
 +
 
 +
</div>
 +
 +
</div></div></div>
 +
 
 +
<div class="col-md-8"><div class="container-fluid">
 +
 
 +
<div class="row">
 +
 
 +
<div class="col-md-8">
 +
==Overview==
 +
These lights brightly flash in response to taking a picture automatically. The kit works wirelessly or wired, with most cameras, like the digital Canon Rebels and 6D as well as the 35mm Pentax K1000s. The kit comes with 2 lights, 2 stands, remote, sync cable, hot shoe adapter and various light covers.
 +
 
 +
==How to Use It==
  
 
===Set Up===
 
===Set Up===
Line 34: Line 50:
  
 
===Attachments===
 
===Attachments===
there are two attachments to choose from
+
there are two attachments in the kit to choose from
 
*The grey reflector is a single item installed after unlocking the blue switch on the side of the light
 
*The grey reflector is a single item installed after unlocking the blue switch on the side of the light
*The soft box is constructed from the white softbox bad and the contents of a small black bag including 4 black rods and 2 covers, 1 white and the other silver and black.  
+
*The soft box is constructed from the white softbox bad and the contents of a small black bag including 4 black rods and 2 covers, 1 white and the other silver and black.
 +
</div></div></div>
 +
 
 +
=== Film Cameras ===
 +
This flash kit can also be connected to most film cameras available at Media Loan. Rather than connecting the transmitter to a hot shoe, you can connect the camera to the lights with the 385HV PC Sync Cable included in the kit. There will be a small circular port, likely near the lens on the front of the camera body, that connects to the PC cable. Do not wiggle or twist the cable in this port: insert it straight in and straight out. The other end plugs into a port on the back of the lights. The camera and lights should sync as soon as they are plugged into each other (there are no buttons or settings that need to be adjusted). If the flash does not fire when a picture is taken, the cable was either not fully inserted or may be broken.
 +
==Troubleshooting==
 +
 
 +
See [[Troubleshooting Media Equipment]] Guide for general information.
 +
 
 +
 +
 
 +
==Media Loan Gear it Connects With Well==
 +
 
 +
{{Collapsed|
 +
 
 +
See the [[Media Loan Catalog]] for more info about the below items.
 +
 
 +
* Canon Rebel T6i
 +
 
 +
}}
 +
 
 +
 +
 
 +
==Similar Models at Media Loan==
 +
 
 +
[[White Lightning Flash Heads Quick Guide]]
 +
<!-- Technical note for source editors: end col-md-8 --> 
 +
 
 +
</div>
 +
 
 +
<div class="col-md-1"></div>
 +
 
 +
<div class="col-md-3 sidebar">
 +
 
 +
{{GA Proficiency Information
 +
 
 +
|Testlink= [[Elinchrom Studio Flash Kit Proficiency Test]]
 +
 
 +
}}
 +
 
 +
<!--GA Proficiency Information is the template for the top of the side bar. There is also one for APS called APS Proficiency Information. To edit the proficiency test link, "edit source" for this page for  for the keyword "Testlink"-->
 +
 
 +
{{Precautions, Help, and Other Wikis for all Media Loan Gear
 +
 
 +
|Exceptions= 
 +
 
 +
*'''For This Gear Specifically'''
 +
 
 +
** To avoid potentially lethal conditions, this unit must be connected to a 3-wire grounded outlet.
 +
** Do not operate with two-wire extension cords or use an adapter to connect to ungrounded outlets.
 +
** This unit contains high voltages and internal components, which can store dangerous voltages even when the unit is unplugged. The use of water around this equipment is not recommended.
 +
** The flash-tube and modeling lamp can get extremely hot. Do not allow finger oils to contact the lamps as this can cause excess heating and premature lamp failure.
 +
** Do not attempt to change flash tubes (the normal bulbs are okay to replace) or disassemble the units. Please bring it back to Media Loan for maintenance.
 +
** Before attempting to operate the unit, ensure that it is securely mounted to a light stand.
 +
** Do not allow unattended children around studio flash equipment as potentially dangerous conditions may result. These dangers may include burns and electrical shock hazards as well as the possibility of falling equipment if cords are tripped over.
 +
 
 +
}}
 +
 
 +
<!--Precautions, Help, and Other Wikis for all Media Loan Gear is the template for the bottom of the sidebar. To edit the precautions for this gear specifically, "edit source" for this page for the keyword "Exceptions". be sure to write in the title for the exceptions similar to the title for what they all have.-->
 +
 
 +
<!-- Technical note for source editors: end col-md-3-->
 +
 
 +
</div>
 +
 
 +
<!-- Technical note for source editors: end row--> 
  
[[Category:Media Loan]]
+
<!-- Technical note for source editors: end container--> 
 +
<!-- Technical note for source editors: Generator=Template:TwoColumn -->
 +
__NOEDITSECTION__
 +
[[category:Digital Cameras and Accessories]]

Latest revision as of 18:15, 6 December 2021


Media Loan Logo.png
A kit with two flashing lights on stands for studio photography.

Overview

These lights brightly flash in response to taking a picture automatically. The kit works wirelessly or wired, with most cameras, like the digital Canon Rebels and 6D as well as the 35mm Pentax K1000s. The kit comes with 2 lights, 2 stands, remote, sync cable, hot shoe adapter and various light covers.

How to Use It

Set Up

  1. Remove black cover from light, apply any attachments you would like (listed below) and turn on.
  2. Test the flash on the light itself with the top right button (with the star shaped image) of the light.
  3. Test the remote by pressing the only button on it and check if both lights respond.
  4. Test if the camera triggers the remote by installing the remote onto the camera's hot shoe mount on top. The “hot” in hot shoe refers to an electrical connection. By pressing the camera’s shutter release button to take a picture, it sends out a trigger to the light kit via the remote.
  • If the above tests work but not the camera trigger, then make sure the camera is out of live view mode (the little button with the image of the camera on it) and be sure to do a full-press and not just a half-press on the shutter release (picture taking button).
  • If the above test doesn’t work, there is also the option to use a wired connection for triggering the lights instead of the remote. There is an adapter in a small box that attaches to the hot shoe of the camera. Connect the wire in the kit from the 3.5mm sync socket on the light to the adapter. Be sure that the light not connected via the cable has the button with the picture of an eye in the on position. This enables the disconnected light to be triggered when it detects light from the light connected to the camera.

Changing Bulb

If you need to change the bulb, make sure it is off, wait for it to cool. Do not touch the bulb with bare hands or the bulb could explode, use the gloves to protect the bulb from your hand oils. When returning equipment, inform Media Loan that a bulb was used. Do not replace the flash tubes, just the standard looking 100watt bulbs stored with kit.

Pack up

Be sure to store with black hard cover over the light protecting the bulbs and lock in place with the blue switch.

Controls

Screen: Displays light Intensity of flash.

  • Arrows: Adjusts contents of screen.
  • Bulb Button: This allows you to adjust and toggle the modeling light which is the standard bulb that remains on before and after flashes.
  • Eye Button: Enables the light to detect and respond to another light flash going off and triggering its own light flash simultaneously. This is only needed if using the sync cable method and not the remote control for triggering lights.
  • Music Button: This enables the light to make an annoying beep sound after triggering the lights to flash as soon as the light is prepared to flash bulbs again.
  • Star Button: This is used to make test flashes.

Attachments

there are two attachments in the kit to choose from

  • The grey reflector is a single item installed after unlocking the blue switch on the side of the light
  • The soft box is constructed from the white softbox bad and the contents of a small black bag including 4 black rods and 2 covers, 1 white and the other silver and black.

Film Cameras

This flash kit can also be connected to most film cameras available at Media Loan. Rather than connecting the transmitter to a hot shoe, you can connect the camera to the lights with the 385HV PC Sync Cable included in the kit. There will be a small circular port, likely near the lens on the front of the camera body, that connects to the PC cable. Do not wiggle or twist the cable in this port: insert it straight in and straight out. The other end plugs into a port on the back of the lights. The camera and lights should sync as soon as they are plugged into each other (there are no buttons or settings that need to be adjusted). If the flash does not fire when a picture is taken, the cable was either not fully inserted or may be broken.

Troubleshooting

See Troubleshooting Media Equipment Guide for general information.


Media Loan Gear it Connects With Well

Collapse-small-silver.png
show less
Expand-small-silver.png
show more


See the Media Loan Catalog for more info about the below items.

  • Canon Rebel T6i



Similar Models at Media Loan

White Lightning Flash Heads Quick Guide