Difference between revisions of "Export Image Sequence - Dragonframe"
From Help Wiki
(Tag: VisualEditor) |
|||
| Line 2: | Line 2: | ||
The image files Dragonframe saves to your project folder as you capture are neither cropped nor rotated. To produce a sequence of images that look just like your animation frames should, you'll have to export them as an image sequence. | The image files Dragonframe saves to your project folder as you capture are neither cropped nor rotated. To produce a sequence of images that look just like your animation frames should, you'll have to export them as an image sequence. | ||
| + | === Export Menu === | ||
# Select '''File''' > '''Export Image Sequence''' | # Select '''File''' > '''Export Image Sequence''' | ||
# Make sure the ''source'' is set to High-resolution. | # Make sure the ''source'' is set to High-resolution. | ||
| Line 7: | Line 8: | ||
# Select desired file format (likely TIFF or PNG), quality settings (likely 100%), naming scheme, and destination. | # Select desired file format (likely TIFF or PNG), quality settings (likely 100%), naming scheme, and destination. | ||
#After exporting, examine images to confirm all settings were correct. | #After exporting, examine images to confirm all settings were correct. | ||
| + | |||
| + | === Source === | ||
| + | The source setting need to be set. | ||
| + | # Set '''Source''' to '''High-resolution JPG/TIFF''' | ||
| + | # Set '''Exposure to X1''' | ||
| + | # Set '''Frame Rate''' to the desired playback speed: | ||
| + | #* 1's = 30 fps | ||
| + | #* 2's = 15 fps | ||
| + | #* 3's = 10 fps | ||
| + | The Transformation and Export Window | ||
| + | |||
| + | === Transformation === | ||
| + | In the Transformation section adjust the crop aspect ratio to match your project settings. | ||
| + | # Check '''Crop to aspect ratio''' and set to 16:9 or 4x3 based on what you shot at. | ||
| + | # Uncheck '''Use push-in mask'''. | ||
| + | # Check '''Rotate/mirror to match animation window''' | ||
| + | # In the '''Scale''' section, set '''px''' to | ||
| + | #* 4:3 = 1280 x 960 | ||
| + | #* 16:9 = 1920 x 1080 | ||
| + | # Check '''Keep proportions''' | ||
[[Category:Dragonframe]] | [[Category:Dragonframe]] | ||
Revision as of 13:55, 1 November 2022
The image files Dragonframe saves to your project folder as you capture are neither cropped nor rotated. To produce a sequence of images that look just like your animation frames should, you'll have to export them as an image sequence.
Export Menu
- Select File > Export Image Sequence
- Make sure the source is set to High-resolution.
- Confirm that your rotation, scaling, and crop settings are configured appropriately.
- Select desired file format (likely TIFF or PNG), quality settings (likely 100%), naming scheme, and destination.
- After exporting, examine images to confirm all settings were correct.
Source
The source setting need to be set.
- Set Source to High-resolution JPG/TIFF
- Set Exposure to X1
- Set Frame Rate to the desired playback speed:
- 1's = 30 fps
- 2's = 15 fps
- 3's = 10 fps
The Transformation and Export Window
Transformation
In the Transformation section adjust the crop aspect ratio to match your project settings.
- Check Crop to aspect ratio and set to 16:9 or 4x3 based on what you shot at.
- Uncheck Use push-in mask.
- Check Rotate/mirror to match animation window
- In the Scale section, set px to
- 4:3 = 1280 x 960
- 16:9 = 1920 x 1080
- Check Keep proportions
