View source for Generic Level1 AV

===Starting===
#     To turn ON the projector, press the display "ON" button.
 The button will blink while the system starts. 
#     On the Control Panel, press the button for your source. A solid light indicates which source is active. 
#     If it seems to not work, you may need to hold the button for 2 seconds.

===HDMI Laptop===
#	Press the HDMI button on the Media Control Panel
#	Plug in your laptop to the provided HDMI cable
#	Sound comes through the HDMI connector; when playing sound, adjust the volume knob on the Media Control Panel to a comfortable level. 
:	If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

===VGA Laptop===
#	Press the VGA button on the Media Control Panel
#	Plug in your laptop to the provided VGA cable
#	Sound comes through the mini plug (earphone) on the VGA cable. Connect it to your earphone jack & make sure the device volume is up. When playing sound, adjust the volume knob on the Media Control Panel to a comfortable level. 
:	If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

===AV Mute===
#	The AV Mute will blackout the projection and silence the audio.
#	Press to mute (it will gurn red), press again to unmute (the button will turn green).

===Finishing Up===
Remember to turn things off when you are done!
:Press and hold the OFF button for two seconds to shut down the system.

===Troubleshooting:===
:Are there lights on the control panel?
:Has the LED above where your computer is plugged in turned from amber to green? (green indicates signal present)
:Is the plug in all the way at the wall and at your computer/adapter?
:Is the volume up 3 indicators or more?



'''Need Help??''' 
'''Want Training??'''

'''Call x6270 for Classroom Support'''