Generic Level1 AV

Starting

1. To turn ON the projector, press the display "ON" button.

The button will blink while the system starts. 

1. On the Control Panel, press the button for your source. A solid light indicates which source is active.
2. If it seems to not work, you may need to hold the button for 2 seconds.

HDMI Laptop

1. Press the HDMI button on the Media Control Panel
2. Plug in your laptop to the provided HDMI cable
3. Sound comes through the HDMI connector; when playing sound, adjust the volume knob on the Media Control Panel to a comfortable level.

If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

VGA Laptop

1. Press the VGA button on the Media Control Panel
2. Plug in your laptop to the provided VGA cable
3. Sound comes through the mini plug (earphone) on the VGA cable. Connect it to your earphone jack & make sure the device volume is up. When playing sound, adjust the volume knob on the Media Control Panel to a comfortable level.

If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

AV Mute

1. The AV Mute will blackout the projection and silence the audio.
2. Press to mute (it will gurn red), press again to unmute (the button will turn green).

Finishing Up

Remember to turn things off when you are done!

Press and hold the OFF button for two seconds to shut down the system.

Troubleshooting:

Are there lights on the control panel?

Has the LED above where your computer is plugged in turned from amber to green? (green indicates signal present)

Is the plug in all the way at the wall and at your computer/adapter?

Is the volume up 3 indicators or more?

Need Help?? Want Training??

Call x6270 for Classroom Support