Difference between revisions of "Library 0406"

From Help Wiki
(DVD:)
(DVD:)
Line 18: Line 18:
 
#Turn on DVD player.
 
#Turn on DVD player.
 
#Use Volume knob to adjust audio levels.
 
#Use Volume knob to adjust audio levels.
:Indented line
+
:(Note: To get audio using RCA input, check out a “dual RCA to mini
(Note: To get audio using RCA input, check out a “dual RCA to mini
+
 
adapter” from Media Loan to plug DVD’s audio output into the wall’s audio input)
 
adapter” from Media Loan to plug DVD’s audio output into the wall’s audio input)
  

Revision as of 09:25, 8 July 2013

Cheat Sheet

0406-AV-graphic.png

LAPTOP:

(You may play a DVD through your laptop.)

  1. Numbered list item
  2. Lower projection screen using the Projector Screen switch. Press the ON button to turn on the Data Projector. Projector will take 30 seconds to warm up. ON button will stop blinking when Projector is ready.
  3. Select PC.
  4. Insert VGA cable from laptop into computer Input Jack. Insert audio cable into the Audio Input.
  5. Turn On your Laptop.
  6. Use the Volume knob to adjust audio levels.
DVD:

(You may play a DVD through your laptop.)

  1. Lower projection screen using rope to pull down screen.
  2. Press the ON button to turn on the Data Projector. Projector will take 30 seconds to warm up. ON button will stop blinking when Projector is ready.
  3. Select Video if using the RCA input or S/Video if using the S/Video input.
  4. Insert the cable from your DVD player into either the RCA or S/Video input.
  5. Turn on DVD player.
  6. Use Volume knob to adjust audio levels.
(Note: To get audio using RCA input, check out a “dual RCA to mini

adapter” from Media Loan to plug DVD’s audio output into the wall’s audio input)

VCR:

(You may bring in a VCR)

  1. Lower projection screen using rope to pull down screen.
  2. Press the ON button to turn on the Data Projector. Projector will take 30 seconds to warm up. ON button will stop blinking when Projector is ready.
  3. Select Video if using the RCA input or S/Video if using the S/Video input.
  4. Insert the cable from your VCR into either the RCA or S/Video input.
  5. Turn on VCR player.
  6. Use Volume knob to adjust audio levels.

(Note: To get audio using RCA input, check out a “dual RCA to mini adapter” from Media Loan to plug VCR’s audio output into the wall’s audio input)