Difference between revisions of "Library 1412"

From Help Wiki
Line 1: Line 1:
 +
===Laptop:===
 +
# Press the projector ON button to turn data projector on. (Projector takes 30 seconds to fully warm up) Projector button stops blinking when fully turned on.
 +
# Select “laptop” button on media control panel.
 +
# After selecting your “laptop” button, press the “Mac Mini” button so the monitor login shows up on the screen
 +
# Locate VGA cable and connect VGA cable to your laptop’s VGA input (audio cable attached to VGA cable). Insert audio cable into laptop headphone jack for audio.
 +
# Locate HDMI cable and connect HDMI cable to your laptop. HDMI cable carries audio, so once connected you will have picture and audio via the HDMI cable.
 +
# Use volume knob to adjust audio level for room audio. Laptop also has volume control.
 +
# Turn on your laptop now.
  
 +
===To Play DVD From Laptop:===
 +
# Same as above
 +
# Same as above
 +
# Insert DVD into laptop’s DVD drive
 +
# DVD icon will show on screen
  
−
[[Category:Media Classrooms]]
+
===To Play DVD From Media Cabinet:===
−
===Computer (built-in)===
+
# Same as above
−
Turn on the projector and select “PC” on the podium. If you are using the built-in MacMini, make sure the podium “Computer” switch is set to “Built-in”. The computer should be on, so just move the mouse or press any key on the keyboard to wake it up. You must authenticate with your TESC login to use the computer, and it may take a few extra moments to start up the first time you log in. If you don’t have a TESC login, call  Media Services at x 6270 for access. Always log out when you are done with the computer.   
+
# Press “DVD” button on podium
 +
# Put your disc in the player
 +
# Use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate
  
−
===Computer (laptop)===
+
===To Play VHS From Media Cabinet:===
−
Turn on the projector and select “PC” on the podium. If you are using your own laptop, make sure the podium “Computer” switch is set to “Portable”. Connect the VGA cable coming out of the podium to your computer, and if you will need to hear computer audio, plug the small audio plug into your headphone jack. An ethernet cable is also provided for internet access.
+
# Same as above
−
For best results, wait until everything is connected before turning on your laptop, and it should automatically appear on the large screen.
+
# Press “VCR” (vhs) button on podium
  
−
===Document Camera===
+
===Document Camera:===
−
Turn on the projector and select “Doc Cam” on the podium. Unfold the arms and lens of the document camera, taking care not to force them. Press the button on the document camera labeled “On/Off”. Place your document on the white surface. To temporarily freeze the image on the screen, press “Pause”, then press again to unfreeze.
+
# Same as above
 +
# Press “Doc Cam” button on podium
 +
# Press the “On/Off” button on document camera
 +
# Place document on the white surface
 +
# Document camera controls are on front of document camera itself
  
−
===DVD or CD===
+
[[Category:Media Classrooms]]
−
The DVD player is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “DVD” on the podium, put your disc in the player, and use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate.
+
−
 
+
−
===VHS tape or TV===
+
−
The VCR is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “VCR” on the podium, put your tape in the player, and use either the podium control buttons or the remote control (in the equipment rack drawer) to control playback or change channels.
+
−
 
+
−
===DV tape===
+
−
The DV deck is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “DVCAM” on the podium, put your tape in the player, and use the remote control (in the equipment rack drawer) to control playback.
+

Revision as of 11:53, 1 December 2015

Laptop:

  1. Press the projector ON button to turn data projector on. (Projector takes 30 seconds to fully warm up) Projector button stops blinking when fully turned on.
  2. Select “laptop” button on media control panel.
  3. After selecting your “laptop” button, press the “Mac Mini” button so the monitor login shows up on the screen
  4. Locate VGA cable and connect VGA cable to your laptop’s VGA input (audio cable attached to VGA cable). Insert audio cable into laptop headphone jack for audio.
  5. Locate HDMI cable and connect HDMI cable to your laptop. HDMI cable carries audio, so once connected you will have picture and audio via the HDMI cable.
  6. Use volume knob to adjust audio level for room audio. Laptop also has volume control.
  7. Turn on your laptop now.

To Play DVD From Laptop:

  1. Same as above
  2. Same as above
  3. Insert DVD into laptop’s DVD drive
  4. DVD icon will show on screen

To Play DVD From Media Cabinet:

  1. Same as above
  2. Press “DVD” button on podium
  3. Put your disc in the player
  4. Use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate

To Play VHS From Media Cabinet:

  1. Same as above
  2. Press “VCR” (vhs) button on podium

Document Camera:

  1. Same as above
  2. Press “Doc Cam” button on podium
  3. Press the “On/Off” button on document camera
  4. Place document on the white surface
  5. Document camera controls are on front of document camera itself
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Library_1412&oldid=27284"

The Evergreen State College