Difference between revisions of "Library 2708"

From Help Wiki
(To Play DVD From Laptop:)
(changed over to new template formatting with sidebar, etc.)
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<pdf width="800" height="500">File:Lib2708.pdf</pdf>
 
  
===Laptop:===
+
__NOTOC__
# Press the projector ON button to turn data projector on. (Projector takes 30 seconds to fully warm up.) Projector button stops blinking when fully turned on.
+
{{TwoColumn
# Select “laptop” button on media control panel, either VGA or HDMI.
+
|lead=
# Connect the corresponding VGA or HDMI cable into your laptop.
+
'''LIB 2708''' is the Physical Computing room, which is located across from Media Loan on the second floor of the library building.
# The image should appear from the projector.
+
|content=
# If not: go to display settings on the laptop and select “Mirror Display”
+
{{AVclassroom_template_podium226}}
 +
{{AVclassroom_template_ALS-plug}}
  
===Mac Mini:===
 
# Press the projector ON button to turn data projector on. (Projector takes 30 seconds to fully warm up.) Projector button stops blinking when fully turned on.
 
# Select ‘Mac’ button on media control panel.
 
# Pull out keyboard and move mouse to wake up system.
 
# Login using TESC login.
 
 
===To Play DVD From Laptop:===
 
# Connect laptop to projector
 
# Insert DVD into laptop’s disc drive
 
# DVD icon will show on screen, proceed to play DVD through player functions
 
 
===To Play DVD From Media Cabinet:===
 
# Same as above
 
# Press “DVD” button on podium
 
# Put your disc in the player
 
# Use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate
 
 
===To Play VHS From Media Cabinet:===
 
# Same as above
 
# Press “VCR” (vhs) button on podium
 
 
===Document Camera:===
 
# Same as above
 
# Press “Doc Cam” button on podium
 
# Press the “On/Off” button on document camera
 
# Place document on the white surface
 
# Document camera controls are on front of document camera itself
 
 
 
'''Need Help??'''
 
 
'''Call Electronic Media Help Desk at x6270 or call Media Loan at x6253 after 5pm or on Saturdays'''
 
  
 +
|sidebar=
 +
{{GetAVHelp}}
 +
}}
 
[[Category:Media Classrooms]]
 
[[Category:Media Classrooms]]

Latest revision as of 16:43, 6 January 2020


LIB 2708 is the Physical Computing room, which is located across from Media Loan on the second floor of the library building.


LIBPANEL.pdf

Source buttons shown here may be in a different order in the classroom.

Starting

  1. To turn ON the projector, press the display "ON" button.
The button will blink for 30 seconds while the projector warms up. 
  1. You may need to hold the button for 2 seconds.
  2. On the AV Control Panel, press the button for your source. A solid light indicates which source is active.

HDMI Laptop

  1. Press the HDMI button on the AV Control Panel
  2. Plug in your laptop to the provided HDMI cable
  3. Sound comes through the HDMI connection; when playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.
If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

VGA Laptop

  1. Press the VGA button on the AV Control Panel
  2. Plug in your laptop to the provided VGA cable
  3. Sound comes through the earphone plug on the VGA cable. Connect it to your earphone port on the laptop & make sure the device volume is up. When playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.
If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

Mac Mini

  1. Press the Mac Mini button on the AV Control Panel
  2. Log in using the keyboard and mouse (if the keyboard and mouse are not on the podium top, check the keyboard tray)
  3. Sound level should be turned up on the mac, and the volume adjusted via the AV Control Panel volume knob. When playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.
Important: If there is a "Audio" switch on the right, near the laptop wires, make sure it is set to "Normal" (not "mixer")

VHS

  1. The VHS player is in the equipment rack (which must be unlocked with a key)
  2. Press the VHS button on the AV Control Panel
  3. Turn on the VCR and put your VHS tape in the player.
  4. Use the AV Control Panel buttons to operate the VCR, or the buttons on the VCR itself. A remote is also in the rack drawer, if one is available.
  5. Closed Caption for the VCR is turned on and off by the "Close Caption" switch near the laptop wires.

Blu-ray / DVD

  1. Updated rooms that contain a Blu-ray player have the player in the front of the the podium below the keyboard tray. (very near the top)
  2. Rooms with only DVD players have the DVD player in the equipment rack (which must be unlocked with a key)
  3. Press the BLU-RAY button or DVD button on the AV Control Panel
  4. Press the eject button on the player and put your disc in the player.
  5. Use the AV Control Panel buttons to operate the player, or use the player's remote control (in the keyboard tray,on top of the podium, or in the rack drawer).
  6. Closed Caption can be turned on/off from the "subtitles" button on the remote, or from the menu system of your video disc.

Document Camera

  1. Press "Doc Cam" on the AV Control Panel
  2. Turn on the document camera either by tapping the power button (new ones), or turning on the switch (old ones).
  3. Adjust the camera arm and head to show your document or demonstration the way you want it on the screen.
  4. New cameras with the folding arm have a switch on the front of the camera head that sets the camera light to off/low/high light
  5. Flatbed-type cameras have a button on the control panel to select the light mode.
  6. Important: To turn off new Epson cameras, pressing the power button twice: the first asks for a confirmation & pressing again will turn it off.

Troubleshooting:

No picture?:

- Try pressing 'Mute All' and then pressing again to unmute
- Is data projector turned on? (try starting again, & call x6270)
- Is the cable firmly connected to the laptop (or adapter, and adapter to laptop)

No audio?:

- Is volume on AV control panel turned up enough to hear?
- Laptop: Is the volume on the laptop turned up and source selected? (HDMI button for HDMI connection, etc?)
- Is the Yamaha (or other brand) receiver turned on in the rack?


Assistive Listening Procedures

This room does not have integrated listening technology installed, but there is a microphone input jack and XLR or phono plug outputs on the panel.
These can be used to connect an extra microphone and listening equipment, or self-contained listening equipment can be used.
Please work with [Access Services] to coordinate an extended checkout of suitable listening equipment from Media Loan.