Difference between revisions of "Longhouse 1007A"
| Line 29: | Line 29: | ||
===Wired Microphone(’s):=== | ===Wired Microphone(’s):=== | ||
| + | 1. Connect XLR cable into either input, Mic 1 or Mic 2, On Figure 1/Figure 3. | ||
| + | |||
| + | 2. Connect microphone into other end of the XLR cable. | ||
| + | |||
| + | 3. Adjust volume using the trim knobs above the mic inputs, (Figure 1)/(Figure 3). | ||
| + | |||
| + | 4. Additional volume can be controlled from the other panel’s volume control, (Figure 2)/(Figure 4). | ||
Revision as of 11:55, 15 August 2013
Contents
LAPTOP: (You may play a DVD through your laptop.)
1. Lower projection screen using the Projector Screen switch.
2. Press the ON button to turn on the Data Projector. Projector will take 30 seconds
to warm up. ON button will stop blinking when Projector is ready.
3. Select PC.
4. Insert VGA cable from laptop into computer Input Jack. Insert audio
cable into the Audio Input.
5. Turn On your Laptop.
6. Use the Volume knob to adjust audio levels.
VCR/DVD:
1. Using an RCA cable, connect the video and audio outputs of the VCR/DVD player
to the 'Video', 'Left Audio' and 'Right Audio' inputs on the panel.
3. Press video toggle on (figure 2).
Microphones:
Wired Microphone(’s):
1. Connect XLR cable into either input, Mic 1 or Mic 2, On Figure 1/Figure 3.
2. Connect microphone into other end of the XLR cable.
3. Adjust volume using the trim knobs above the mic inputs, (Figure 1)/(Figure 3).
4. Additional volume can be controlled from the other panel’s volume control, (Figure 2)/(Figure 4).
