Difference between revisions of "Longhouse 1007A"

From Help Wiki
m (added note about page needing update because inaccurate since AV refresh)
(updated for last AV refresh)
Line 1: Line 1:
 +
Longhouse1007ab
  
[[Category:Media Classrooms]]
+
===Laptop===
  
Please note: this page is in need of updating, and on our list. The AV system has been updated.[[File:LCC.pdf]]
+
# Tap the touch screen to start system.
 +
# Lower the screen via the screen control switch on the wall.
 +
# Press '''HDMI''' or '''VGA'''. depending on what plug your laptop uses. This will start the projector
 +
# Connect the appropriate cord to your laptop (detailed instructions are available by pressing Help on the touchscreen (on the left, third button down).
 +
# If you do not see your laptop image then '''restart the computer''' or check your mirroring/appearance settings in your display settings (Windows) or system preferences (Mac).
 +
# Please note that 1007B also has HDMI & VGA buttons for a panel on the side wall of the room.
  
__NOTOC__
+
===Audio===
  
Need help? AV classroom support ext. 6270.
+
# To play sound from a phone or other media player, you will need an adapter with a 40db pad to plug into the mic port, or a mixer that can plug into the mic port. Mic volume is controlled from the mic screen. If you are playing sound from a laptop the video must also be present (a remote is available to turn off the projector if you are not using it)
  
===LAPTOP: (You may play a DVD through your laptop.)===
 
#Lower the projection screen using the '''Projector Screen''' switch. (Figure 2)
 
#Press the '''ON''' button to turn on the Data Projector.  Projector will take 30 seconds to warm up.  The '''ON''' button will stop blinking when projector is ready. (Figure 2)
 
#Press the '''PC''' button. (Figure 2)
 
#Insert the VGA cable from laptop into computer Input Jack. Insert audio cable into the Audio Input. (Figure 1)
 
#Turn on your laptop.
 
#Use the '''Volume''' knob to adjust audio levels. (Figure 2)
 
  
==VCR/DVD==
 
# Using an RCA cable, connect the video and audio outputs of the VCR/DVD player to the '''Video''', '''Left Audio''' and '''Right Audio''' inputs on the panel. (Figure 1)
 
# Press the '''Video''' button  (Figure 2).
 
  
==Microphones:==
+
===Microphones===
  
 
====Wired Microphones====
 
====Wired Microphones====
#Connect an XLR cable into either input,  '''Mic 1''' or '''Mic 2'''. (Figure 1)
+
# Connect an XLR cable into either input,  '''Mic 1''' or '''Mic 2'''. (Figure 1)
#Connect a microphone into other end of the XLR cable.
+
# Connect a microphone into other end of the XLR cable.
#Adjust the volume by using the '''trim''' knobs above the mic inputs, (Figure 1)
+
# Adjust the volume after you set you computer volume level (the main volume also affects the mics in the Longhouse) by tapping the Mics icon on the touch panel and using the the control for the port you connected to.
#Additional volume can be controlled from the other panel’s '''volume''' control. (Figure 2)
+
  
====Wireless Microphone’s-<span style="color:#FFD700">This side is YELLOW</span>====
+
 
* The Longhouse wireless microphones can be checked out from Media Loan (Faculty only).
+
 
* There are two microphones, one for each room. The microphone with yellow tape only works in 1007A.
+
====Wireless Microphones====
 +
# 1007a is<span style="color:#FFD700"> YELLOW</span> microphone.
 +
# 1007b is<span style="color:#FF0000"> Red </span> microphone.
 +
* The Longhouse wireless microphones right now must be checked out from Media Loan (Faculty only).
 +
* There are two microphones: one for each room.  
 +
* The microphone with yellow tape only works in 1007A.  
 
* The microphone with red tape works in 1007B or can be combined to have audio in both rooms (see ‘combining’).
 
* The microphone with red tape works in 1007B or can be combined to have audio in both rooms (see ‘combining’).
 
# To turn on the microphone hold down the red button on the bottom of the microphone.
 
# To turn on the microphone hold down the red button on the bottom of the microphone.
 
# The “Mic” button on the side of the microphone is a mute switch. when illuminated red, the mic is on.
 
# The “Mic” button on the side of the microphone is a mute switch. when illuminated red, the mic is on.
# The volume can be controlled using the '''volume''' knob on panel. (Figure 2)
+
# Volume for the wireless is controlled by the main volume
  
==Combining==
 
* If you are using 1007A and 1007B as a single room, the combine switch must be set to '''Combined'''.
 
* There is a switch in the 1007B side that you can adjust to combine or separate your signal.
 
  
====Dual Projection:====
+
===A/V Mute===
# Connect the VGA cable from 1007B (The side with the combine switch) into your laptop. (Dual screen will not work if you are using the VGA cable in 1007A). (Figure 1)
+
 
# On the panels In both rooms select the '''PC''' inputs. (Figure 2)
+
The A/V mute allows you to black out the projector and mute all audio.
 +
 
 +
===Shutdown Procedures===
 +
# Select '''Power Off''' on the touch screen (lower left button)
 +
# Confirm the shutdown action.
 +
 
 +
'''Return equipment and LOCK all locks'''
 +
 
 +
 
 +
 
 +
==Combining==
 +
* If you are using 1007A and 1007B as a single room, press the '''Combine Rooms''' button on the top left of the touchpanel, and then confirm that is what you want to do.
 +
* Both touchpanels will show the HDMI and VGA options in both rooms, select where you are plugged in.
  
 
====Dual Room Wired Microphone:====
 
====Dual Room Wired Microphone:====
 
* Follow the same steps as a single room wired mic.  
 
* Follow the same steps as a single room wired mic.  
* You must connect the mic into the panel in 1007B (The side with the combine switch).
+
* You must connect mics into the panel in 1007B (The right-hand side if you are facing the touch panels).
  
 
====Dual Room Wireless Microphone:====
 
====Dual Room Wireless Microphone:====
 
* Follow the same steps as a single room wireless microphone.  
 
* Follow the same steps as a single room wireless microphone.  
 
* You must use the wireless mic labled B. <span style="color:#FF0000"> RED TAPED MICROPHONE </span>
 
* You must use the wireless mic labled B. <span style="color:#FF0000"> RED TAPED MICROPHONE </span>
 +
 +
===Shutdown Procedures===
 +
# Select '''Power Off''' on the touch screen (lower left button)
 +
# Confirm the shutdown action.
 +
 +
'''Return equipment and LOCK all locks'''
 +
 +
 +
===Troubleshooting:===
 +
No picture?:
 +
:- Does laptop have power?
 +
:- Is data projector turned on?
 +
:- Is cable fully connected to the laptop or adapter?
 +
No audio?:
 +
:- Is room volume on touchscreen turned up?
 +
:- Laptop: Is the volume on your laptop turned up and output source correctly selected? 
 +
Extra noise from the speakers?:
 +
:- Tap the mic button and make sure any mics you aren't using are muted there.
 +
 +
 +
 +
[[Category:Media Classrooms]]

Revision as of 13:33, 3 January 2020

Longhouse1007ab

Laptop

  1. Tap the touch screen to start system.
  2. Lower the screen via the screen control switch on the wall.
  3. Press HDMI or VGA. depending on what plug your laptop uses. This will start the projector
  4. Connect the appropriate cord to your laptop (detailed instructions are available by pressing Help on the touchscreen (on the left, third button down).
  5. If you do not see your laptop image then restart the computer or check your mirroring/appearance settings in your display settings (Windows) or system preferences (Mac).
  6. Please note that 1007B also has HDMI & VGA buttons for a panel on the side wall of the room.

Audio

  1. To play sound from a phone or other media player, you will need an adapter with a 40db pad to plug into the mic port, or a mixer that can plug into the mic port. Mic volume is controlled from the mic screen. If you are playing sound from a laptop the video must also be present (a remote is available to turn off the projector if you are not using it)


Microphones

Wired Microphones

  1. Connect an XLR cable into either input, Mic 1 or Mic 2. (Figure 1)
  2. Connect a microphone into other end of the XLR cable.
  3. Adjust the volume after you set you computer volume level (the main volume also affects the mics in the Longhouse) by tapping the Mics icon on the touch panel and using the the control for the port you connected to.


Wireless Microphones

  1. 1007a is YELLOW microphone.
  2. 1007b is Red microphone.
  • The Longhouse wireless microphones right now must be checked out from Media Loan (Faculty only).
  • There are two microphones: one for each room.
  • The microphone with yellow tape only works in 1007A.
  • The microphone with red tape works in 1007B or can be combined to have audio in both rooms (see ‘combining’).
  1. To turn on the microphone hold down the red button on the bottom of the microphone.
  2. The “Mic” button on the side of the microphone is a mute switch. when illuminated red, the mic is on.
  3. Volume for the wireless is controlled by the main volume


A/V Mute

The A/V mute allows you to black out the projector and mute all audio.

Shutdown Procedures

  1. Select Power Off on the touch screen (lower left button)
  2. Confirm the shutdown action.

Return equipment and LOCK all locks


Combining

  • If you are using 1007A and 1007B as a single room, press the Combine Rooms button on the top left of the touchpanel, and then confirm that is what you want to do.
  • Both touchpanels will show the HDMI and VGA options in both rooms, select where you are plugged in.

Dual Room Wired Microphone:

  • Follow the same steps as a single room wired mic.
  • You must connect mics into the panel in 1007B (The right-hand side if you are facing the touch panels).

Dual Room Wireless Microphone:

  • Follow the same steps as a single room wireless microphone.
  • You must use the wireless mic labled B. RED TAPED MICROPHONE

Shutdown Procedures

  1. Select Power Off on the touch screen (lower left button)
  2. Confirm the shutdown action.

Return equipment and LOCK all locks


Troubleshooting:

No picture?:

- Does laptop have power?
- Is data projector turned on?
- Is cable fully connected to the laptop or adapter?

No audio?:

- Is room volume on touchscreen turned up?
- Laptop: Is the volume on your laptop turned up and output source correctly selected?

Extra noise from the speakers?:

- Tap the mic button and make sure any mics you aren't using are muted there.