Difference between revisions of "MIDI Controlers - MML"

From Help Wiki
(KORG nanoKONTROL2)
(Restore Factory Settings)
 
Line 14: Line 14:
 
# Hold down '''KEY/RANGE''' button, '''SCALE/TAP''' button and '''SCENE''' button while connecting power through USB cable from the computer.
 
# Hold down '''KEY/RANGE''' button, '''SCALE/TAP''' button and '''SCENE''' button while connecting power through USB cable from the computer.
 
# The ''scene LEDs'' will stop blinking when the factory-set default state has been restored.
 
# The ''scene LEDs'' will stop blinking when the factory-set default state has been restored.
 +
 +
===Axiom 61===
 +
==== Restore Factory Settings ====
 +
*  Hold down both of the'''-/+''' buttons while connecting power through USB cable from the computer.
  
  
 
[[Category:Multimedia Lab]]
 
[[Category:Multimedia Lab]]

Latest revision as of 10:27, 9 May 2013

KORG nanoKEY2

Restore Factory Settings

  1. Hold down OCT - button, OCT + button and MOD button while connecting power through USB cable from the computer.
  2. The OCT - button and the OCT + button will blink when the factory-set default condition has been restored.

KORG nanoKONTROL2

Restore Factory Settings

  1. Hold down PREV TRACK button, NEXT TRACK button and CYCLE button while connecting power through USB cable from the computer.
  2. The transport buttons (except CYCLE) will blink when the factory-set default state has been restored.

KORG nanoPAD2

Restore Factory Settings

  1. Hold down KEY/RANGE button, SCALE/TAP button and SCENE button while connecting power through USB cable from the computer.
  2. The scene LEDs will stop blinking when the factory-set default state has been restored.

Axiom 61

Restore Factory Settings

  • Hold down both of the-/+ buttons while connecting power through USB cable from the computer.