Difference between revisions of "Medium Format Cameras Proficiency Test"

From Help Wiki
(WRITTEN TEST)
(OPERATIONAL PROFICIENCY)
Line 18: Line 18:
 
:('''To be done during your scheduled appointment''')
 
:('''To be done during your scheduled appointment''')
  
# Identify all parts and controls on the camera, and identify differences between cameras.
+
* Identify all parts and controls on the camera, and identify differences between cameras.
# Remove the camera from its case and load it, taking note of how easily the case can be damaged.
+
* Remove the camera from its case and load it, taking note of how easily the case can be damaged.
# The back cover latch ring is marked with a "C" and an "O".  Describe what do they stand for and how to use them.  
+
* The back cover latch ring is marked with a "C" and an "O".  Describe what do they stand for and how to use them.  
# Set the shutter speed to 1/125th sec. and f-stop to f4.
+
* Set the shutter speed to 1/125th sec. and f-stop to f4.
# Demonstrate focussing and framing using the viewing screen, critical focus magnifier, and sports finder.
+
* Demonstrate focusing and framing using the viewing screen, critical focus magnifier, and sports finder.
# Cock the shutter and take a picture, advance the film.
+
* Cock the shutter and take a picture, advance the film.
# Use the self-timer properly, explain flash sync function and precautions
+
* Use the self-timer properly, explain flash sync function and precautions
# Wind film through camera and demonstrate proper film handling when unloading camera.
+
* Wind film through camera and demonstrate proper film handling when unloading camera.
# Demonstrate proper lens cleaning techniques and finally close up the camera and prepare it for storage.
+
* Demonstrate proper lens cleaning techniques and finally close up the camera and prepare it for storage.
  
 
  [[category:Media Loan]]
 
  [[category:Media Loan]]

Revision as of 11:50, 22 July 2013

Proficiency Test

WRITTEN TEST

Answers can be found in Medium Format Cameras Operating Guide.

Complete this written portion on a separate sheet of paper before arriving for your operational proficiency.

  1. What size film do the 2 1/4" Cameras use? What size are the pictures taken with these cameras? How many exposures to a roll?
  2. What is the significance of the two red dots or triangles inside the back of the camera, and how do they effect the loading of the camera?
  3. When would you use the magnifier? How do you set it up?
  4. Identify the differences between the film advance and shutter cocking mechanisms on the different cameras.
  5. Where does the empty spool at the bottom of the camera go in order to load a new roll of film?
  6. The back cover latch ring is marked with a "C" and an "O" what do they stand for?
  7. What is the function of the M-X sync selector? Why should you not set the self-timer with it in the "M" position?
  8. How do you rewind the film?
  9. What is the extent of your financial responsibility each and every time you check out this or any other equipment from Media Loan?

OPERATIONAL PROFICIENCY

(To be done during your scheduled appointment)
  • Identify all parts and controls on the camera, and identify differences between cameras.
  • Remove the camera from its case and load it, taking note of how easily the case can be damaged.
  • The back cover latch ring is marked with a "C" and an "O". Describe what do they stand for and how to use them.
  • Set the shutter speed to 1/125th sec. and f-stop to f4.
  • Demonstrate focusing and framing using the viewing screen, critical focus magnifier, and sports finder.
  • Cock the shutter and take a picture, advance the film.
  • Use the self-timer properly, explain flash sync function and precautions
  • Wind film through camera and demonstrate proper film handling when unloading camera.
  • Demonstrate proper lens cleaning techniques and finally close up the camera and prepare it for storage.