Difference between revisions of "O2R-MOTU-Digital Performer Cheat Sheet"
From Help Wiki
| Line 12: | Line 12: | ||
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs) | (Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs) | ||
| − | *O2R - | + | *O2R - find 'Layer' section and select 1-24 |
*Trim out or choose +48V On/Off for each channel you plugged in to | *Trim out or choose +48V On/Off for each channel you plugged in to | ||
*Push fader up and you should see levels on the Meters | *Push fader up and you should see levels on the Meters | ||
| Line 19: | Line 19: | ||
*Turn up 'Control Room Level' light grey knob to control speaker volume | *Turn up 'Control Room Level' light grey knob to control speaker volume | ||
*Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it. | *Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it. | ||
| + | *On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer | ||
| + | |||
| + | |||
| + | |||
Revision as of 09:22, 21 April 2015
Directions:
- Turn ON Main Power (orange switch on desk to the right)
- On the O2R console:
Locate scene memory Press Display Toggle to 95 Zena DP template Press Store
- Studio: Patch in microphone to Panel A, Input 1
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)
- O2R - find 'Layer' section and select 1-24
- Trim out or choose +48V On/Off for each channel you plugged in to
- Push fader up and you should see levels on the Meters
- Push up stereo fader
- On the Control Room section select 'STEREO'
- Turn up 'Control Room Level' light grey knob to control speaker volume
- Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it.
- On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer
