Difference between revisions of "O2R-MOTU-Digital Performer Cheat Sheet"

From Help Wiki
(Created page with "Directions: Category:Audio Lab")
 
Line 1: Line 1:
 
Directions:
 
Directions:
 +
 +
*Turn ON Main Power (orange switch on desk to the right)
 +
 +
*On the O2R console:
 +
Locate scene memory
 +
Press Display
 +
Toggle to 95 Zena DP template
 +
Press Store
 +
 +
*Studio: Patch in microphone to Panel A, Input 1
 +
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)
 +
 +
*O2R - Find Layer section and select 1-24
 +
*Trim out or choose +48V On/Off for each channel you plugged in to
 +
*Push fader up and you should see levels on the Meters
 +
*Push up stereo fader
 +
*On the Control Room section select 'STEREO'
 +
*Turn up 'Control Room Level' light grey knob to control speaker volume
 +
*Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it.
 +
 +
  
  
 
[[Category:Audio Lab]]
 
[[Category:Audio Lab]]

Revision as of 09:18, 21 April 2015

Directions:

  • Turn ON Main Power (orange switch on desk to the right)
  • On the O2R console:

Locate scene memory Press Display Toggle to 95 Zena DP template Press Store

  • Studio: Patch in microphone to Panel A, Input 1

(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)

  • O2R - Find Layer section and select 1-24
  • Trim out or choose +48V On/Off for each channel you plugged in to
  • Push fader up and you should see levels on the Meters
  • Push up stereo fader
  • On the Control Room section select 'STEREO'
  • Turn up 'Control Room Level' light grey knob to control speaker volume
  • Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it.