Difference between revisions of "O2R-MOTU-Digital Performer Cheat Sheet"

From Help Wiki
Line 12: Line 12:
 
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)
 
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)
  
*O2R - find 'Layer' section and select 1-24
+
*O2R - find '''Layer''' section and select 1-24
 
*Trim out or choose +48V On/Off for each channel you plugged in to
 
*Trim out or choose +48V On/Off for each channel you plugged in to
 
*Push fader up and you should see levels on the Meters
 
*Push fader up and you should see levels on the Meters
 
*Push up stereo fader
 
*Push up stereo fader
*On the Control Room section select 'STEREO'
+
*On the Control Room section select '''STEREO'''
 
*Turn up 'Control Room Level' light grey knob to control speaker volume
 
*Turn up 'Control Room Level' light grey knob to control speaker volume
*Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it.
+
*Open Digital Performer and choose '''Audio Lab Template''', save to Storage drive in your folder with your name on it.
 
*On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer
 
*On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer
  
 
'''Headphone Mixes'''
 
'''Headphone Mixes'''
*Use the 'Encoder knobs on the O2R to control headphone volume
+
*Use the '''Encoder''' knobs on the O2R to control headphone volume
*In the 'Encoder Mode' section select 'AUX'
+
*In the '''Encoder Mode''' section select '''AUX'''
*Use the Encoder knob on your 'LIVE' channel to control volume to the headphones
+
*Use the Encoder knob on your '''LIVE''' channel to control volume to the headphones
 
*Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R
 
*Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R
  

Revision as of 14:54, 10 February 2016

Directions:

  • Turn ON Main Power (orange switch on desk to the right)
  • On the O2R console:

Locate scene memory Press "Display" Toggle to "95 Zena DP template" Press "Recall"

  • Studio: Patch in microphone to Panel A, Input 1

(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)

  • O2R - find Layer section and select 1-24
  • Trim out or choose +48V On/Off for each channel you plugged in to
  • Push fader up and you should see levels on the Meters
  • Push up stereo fader
  • On the Control Room section select STEREO
  • Turn up 'Control Room Level' light grey knob to control speaker volume
  • Open Digital Performer and choose Audio Lab Template, save to Storage drive in your folder with your name on it.
  • On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer

Headphone Mixes

  • Use the Encoder knobs on the O2R to control headphone volume
  • In the Encoder Mode section select AUX
  • Use the Encoder knob on your LIVE channel to control volume to the headphones
  • Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R