Difference between revisions of "O2R-MOTU-Digital Performer Cheat Sheet"

From Help Wiki
(Updating out-of-date page.)
m (At a Glance)
Line 1: Line 1:
 
== '''At a Glance''' ==
 
== '''At a Glance''' ==
'''Directions:'''
+
'''Directions for using the Yamaha 02R Console''':
 
+
* Locate scene memory Press '''Display''' Toggle to Scene '''95 or 96''' Press '''Recall'''
*On the O2R console:
+
Locate scene memory
+
Press '''Display'''
+
Toggle to Scene '''95 or 96'''
+
Press '''Recall'''
+
 
** Scene 95 if for Multitrack Recording, Scene 96 is for Surround Mixing.
 
** Scene 95 if for Multitrack Recording, Scene 96 is for Surround Mixing.
  

Revision as of 14:18, 16 July 2018

At a Glance

Directions for using the Yamaha 02R Console:

  • Locate scene memory Press Display Toggle to Scene 95 or 96 Press Recall
    • Scene 95 if for Multitrack Recording, Scene 96 is for Surround Mixing.
  • Studio: Patch in microphone to Panel A, Input 1

(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)

  • O2R - find Layer section and select 1-24
  • Trim out or choose +48V On/Off for each channel you plugged in to
  • Push fader up and you should see levels on the Meters
  • Push up stereo fader
  • On the Control Room section select STEREO
  • Turn up Control Room Level light grey knob to control speaker volume
  • Open Digital Performer and choose Audio Lab Template, save to Storage drive in your folder with your name on it.
  • On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer

Headphone Mixes

  • Use the Encoder knobs on the O2R to control headphone volume
  • In the Encoder Mode section select AUX
  • Use the Encoder knob on your LIVE channel to control volume to the headphones
  • Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R