Difference between revisions of "O2R-MOTU-Digital Performer Cheat Sheet"

From Help Wiki
Line 5: Line 5:
 
*On the O2R console:
 
*On the O2R console:
 
Locate scene memory
 
Locate scene memory
Press Display
+
Press "Display"
 
Toggle to 95 Zena DP template
 
Toggle to 95 Zena DP template
Press Store
+
Press "Recall"
  
 
*Studio: Patch in microphone to Panel A, Input 1
 
*Studio: Patch in microphone to Panel A, Input 1

Revision as of 14:49, 10 February 2016

Directions:

  • Turn ON Main Power (orange switch on desk to the right)
  • On the O2R console:

Locate scene memory Press "Display" Toggle to 95 Zena DP template Press "Recall"

  • Studio: Patch in microphone to Panel A, Input 1

(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)

  • O2R - find 'Layer' section and select 1-24
  • Trim out or choose +48V On/Off for each channel you plugged in to
  • Push fader up and you should see levels on the Meters
  • Push up stereo fader
  • On the Control Room section select 'STEREO'
  • Turn up 'Control Room Level' light grey knob to control speaker volume
  • Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it.
  • On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer

Headphone Mixes

  • Use the 'Encoder knobs on the O2R to control headphone volume
  • In the 'Encoder Mode' section select 'AUX'
  • Use the Encoder knob on your 'LIVE' channel to control volume to the headphones
  • Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R