O2R-MOTU-Digital Performer Cheat Sheet

From Help Wiki
Revision as of 09:22, 21 April 2015 by Vergaraz (Talk | contribs)

Directions:

  • Turn ON Main Power (orange switch on desk to the right)
  • On the O2R console:

Locate scene memory Press Display Toggle to 95 Zena DP template Press Store

  • Studio: Patch in microphone to Panel A, Input 1

(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)

  • O2R - find 'Layer' section and select 1-24
  • Trim out or choose +48V On/Off for each channel you plugged in to
  • Push fader up and you should see levels on the Meters
  • Push up stereo fader
  • On the Control Room section select 'STEREO'
  • Turn up 'Control Room Level' light grey knob to control speaker volume
  • Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it.
  • On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer