Difference between revisions of "OLympus LS-100 Workshop"

From Help Wiki
(Headphones)
m (Olympus LS-100 Recorder)
(20 intermediate revisions by 3 users not shown)
Line 14: Line 14:
 
  Equipment and accessories valued under $50 — $5.00 per day
 
  Equipment and accessories valued under $50 — $5.00 per day
 
   
 
   
*[[Microphone_Basics | Microphone Basics]]  
+
===[[Microphone_Basics | Media Loan Microphone Guide and Microphone Basics]]===
*[[Olympus_LS-100_Multi-Track_PCM_Recorder_Operating_Guide | Olympus LS-100 Operating Guide]]
+
===[[Olympus_LS-100_Multi-Track_PCM_Recorder_Operating_Guide | Olympus LS-100 Operating Guide]]===
  
  
Line 81: Line 81:
 
===Headphones===
 
===Headphones===
 
* Always use headphones.
 
* Always use headphones.
* If you are only one of the two xlr inputs you will only hear sound on one side of the headphones.
+
* If you are only using one of the two XLR inputs, you will only hear sound on one side of the headphones.
  
 
===Media Loan Shopping List===
 
===Media Loan Shopping List===
 
*Olympus LS-100
 
*Olympus LS-100
*Mic cables
+
*XLR cables (AKA "Mic Cables")
 
*Headphones
 
*Headphones
*Extension cables
+
*Desk stand / floor stand / microphone handle (that can screw into the back of the Olympus)
*Desk stand, floor stand, microphone handle
+
 
*Microphones:
 
*Microphones:
**Recommended for vocal recording > SM-58, SM-57, Sennheiser 421, ECM-50 Lavolier
+
**Recommended for vocal recording > SM-58, SM-57, Sennheiser 421, AT8537 Lavaliere
 +
*Extension cords (Optional:  Only needed if you want your Olympus to be connected to power ''while'' you are recording, and you are not nearby a wall outlet)
  
  
Line 97: Line 97:
  
 
==Olympus LS-100 Recorder==
 
==Olympus LS-100 Recorder==
* Digital audio recorder that records to flash memory cards.
+
* Digital audio recorder that records to flash memory cards, no moving parts.  
* It has 4 GB's on internal memory or you can use your own SD card.  
+
* It has 4 GB's of internal memory or you can use your own SD card.  
* 96kHz/24 bit linear PCM recording.
+
* Up to 96kHz/24-bit linear PCM (.wav) recording.
* Two 90° stereo condenser microphones.
+
* Two built-in condenser microphones arranged in an X-Y configuration for stereo recording.
 
* Left & right XLR / phone combo inputs and a stereo mini mic input.
 
* Left & right XLR / phone combo inputs and a stereo mini mic input.
* When you are done you copy files off just like using a USB drive.
+
* When you are done recording, you copy files to your computer as though you were using an external USB drive.
  
* [[Olympus_LS-100_Multi-Track_PCM_Recorder_Operating_Guide#Formatting_the_Recorder.2FSD_Card_and_Erasing_All_Data |Format the internal memory]] before use, and before returning to Media Loan.
+
* [[Olympus_LS-100_Multi-Track_PCM_Recorder_Operating_Guide#Formatting_the_Recorder.2FSD_Card_and_Erasing_All_Data |Format the internal memory]] before use, ''and'' before returning to Media Loan.
 
* [[Olympus_LS-100_Multi-Track_PCM_Recorder_Operating_Guide#The_Menu_System | Menu Settings]]
 
* [[Olympus_LS-100_Multi-Track_PCM_Recorder_Operating_Guide#The_Menu_System | Menu Settings]]
 
* [[Olympus_LS-100_Multi-Track_PCM_Recorder_Operating_Guide | Olympus LS-100 Operating Guide]]
 
* [[Olympus_LS-100_Multi-Track_PCM_Recorder_Operating_Guide | Olympus LS-100 Operating Guide]]
  
 
===Record Settings===
 
===Record Settings===
The settings below will set the recorder to use the XLR inputs with manual record level.
+
===='''These settings will enable the recorder to use both (2) XLR inputs with manual record level:'''====
 +
# Menu > Record Mode > Normal
 +
# Menu > Mic Gain > XLR (L) > HI
 +
# Menu > Mic Gain > XLR (R) > HI
 +
# Menu > Rec Level > XLR (L) > Manual > Limit/Comp Off OR Limiter 1/2 if you want extra protection from clipping your recorded audio
 +
# Menu > Rec Level > XLR (R) > Manual > Limit/Comp Off OR Limiter 1/2 if you want extra protection from clipping your recorded audio
 +
# Menu > Input Select > XLR/Phone
 +
# Menu > Rec Format > PCM > 48.0 Khz / 24 Bit
 +
# Menu > Low Cut Filter > 100Hz or OFF
 +
# Menu > Pre-Recording > Off
 +
# Menu > Rec Monitor > On (this allows you to listen to audio in your headphones while recording)
  
# '''Menu''' > '''Record Mode''' > '''Normal'''.
+
===='''Other settings to take note of:'''====
# '''Menu''' > '''Mic Gain''' > '''XLR (L) >''' '''LO'''.
+
# Menu > Press the Right button ( >>| ) four times to get to the LCD/Sound Menu screen
# '''Menu''' > '''Mic Gain''' > '''XLR (R''') > '''LO'''.
+
# LCD/Sound Menu > Backlight > Lighting Time > Always on (this keeps your display from turning off)
# '''Menu''' > '''Rec Level''' > '''XLR (L) > Manual''' > '''Limit/Comp Off'''.
+
# LCD/Sound Menu > Beep > Press the Down button ( - ) until the number reads as "00" (this mutes the beep sound when pressing buttons)
# '''Menu''' > '''Rec Level > XLR (R)''' > '''Manual''' > '''Limit/Comp Off'''.
+
# LCD/Sound Menu > Voice Guide > On/Off > Off (If you do not want your device to talk to you every time you press a button, turn Voice Guide OFF)
# '''Menu''' > '''Input Select''' > '''XLR/Phone'''.
+
# Menu > Press the Right button ( >>| ) five times to get to the Device Menu screen
# '''Menu''' > '''Rec Format''' > '''PCM''' > '''48.0 Khz / 24 Bit'''.
+
# Device Menu > Time & Date > Use the Left/Right/Up/Down buttons to set Time & Date (this can be helpful when reviewing your unnamed files later)
# '''Menu''' > '''Low Cut Filter''' > '''100Hz'''.
+
# '''Device Menu > Format > Internal Memory > Start > Start (Formatting means all files will be deleted off of the device, so only do this when you first check out your recorder and after you have safely stored your own recorded files onto a computer and/or other devices)'''
# '''Menu''' > '''Pre-Recording''' > Off'''.
+
 
# '''Menu''' > '''Rec Monitor''' > '''On'''.
+
=== USB and Power Settings ===
 +
The '''USB Connection''' setting needs to be changed to either connect the recorder to a computer or to power the recorder from AC while recording. <br>There are 3 options:
 +
'''PC''': allows the recorder to be connected to a computer.  Can be used to charge the batteries.
 +
* '''AC Adapter''': allows the recorder to be in record mode while connected to AC.  Can be used to charge the batteries.
 +
* '''Optional''':  anytime the recorder is connected to a computer or the AC Adaptor it will display a menu to select '''PC''' or '''AC Adapter'''.  Use this setting.
 +
 
 +
# Press the '''MENU''' button
 +
# Forward through the tabs to the '''DEVICE MENU'''  
 +
# Press the '''-''' button down to select '''USB Settings''' and press '''OK'''.
 +
# Select  '''USB Connection''' and press '''OK'''.
 +
# Select  '''Optional''' and press '''OK'''.
  
 
===Recording Exercise===
 
===Recording Exercise===
Line 128: Line 148:
 
# Avoid noisy public locations (like restaurants, or areas near a road).  
 
# Avoid noisy public locations (like restaurants, or areas near a road).  
 
# If possible, eliminate background noises (turn off stereos, TV’s, fans, air circulation vents). A room with carpeting and furniture will typically sound better than one with hard floors (too much echo).
 
# If possible, eliminate background noises (turn off stereos, TV’s, fans, air circulation vents). A room with carpeting and furniture will typically sound better than one with hard floors (too much echo).
# It is recommended to record some "room tone" to be able to insert any pauses needed later in post-production.
+
# It is recommended to record some "Room Tone" to be able to insert any pauses needed later in post-production
 +
#* To record proper "Room Tone," setup your mics roughly where they will be placed during the recording, then record 30 seconds of "silence" to capture the ambient noise in the room.  Not only can this help you when inserting pauses during the editing process, it can also help you should you need to run a "noise removal" process.  
  
====Check the Settings====
+
====Getting the Device Prepared for Recording====
# Insert tha battery.
+
# Insert the battery.
# Turn on recorder
+
# Turn on recorder.
# Format card
+
# Format card.
# Plug in headphones.  Turn the '''Rec Monitor''' on.
+
# Check menu options as listed in the above "Record Settings" section:
# Connect an external XLR mic to the recorder the left XLR input.
+
#* Make sure to set device to record at 48 kHz / 24 bit PCM
# Set to record 48 Khz / 24 bit, manual record levels, and set the '''Limiter''' to off.
+
# Plug in headphones.  Ensure that the '''Rec Monitor''' is on.
# Set the '''Low Cut Filter''' to 100 Hz.
+
# Connect a microphone to the recorder's left XLR input.
  
 
====Make a Test Recording====
 
====Make a Test Recording====
# Press '''Rec''' button once - this will go in record pause mode
+
# Press '''Rec''' button once - this will put the Olympus in "record-pause" mode, which will allow you to hear the microphone without actually recording.
# Test the microphone placement, confirm if you are hearing the built in mic, or the external, any crackles, or hums, room noise, too close, too far away from the sound source?  
+
# Test the microphone placement, confirm if you are hearing the built-in mics, or the external mic you have attached.
# Set levels with the record level controls on the right of the recorder. Levels should be the loudest around -12dB
+
#* Are you hearing any crackles, or hums, room noise? Too close, too far away from the sound source?  
# Press '''Rec''' to start recording (counter will be running, record light will be solid)
+
# Set levels with the record level controls on the right of the recorder. At their loudest, levels should not exceed -12dB to -6dB.
 +
# Press '''Rec''' again to start the recording (check that the counter is running, and that the record light is solid).
 
# Listen on the headphones.  If you are only using the left XLR input, you will only hear audio on the left headphone.
 
# Listen on the headphones.  If you are only using the left XLR input, you will only hear audio on the left headphone.
 
# Press '''Stop''' to stop recording
 
# Press '''Stop''' to stop recording
Line 153: Line 175:
 
# The file name will be displayed in the window.   
 
# The file name will be displayed in the window.   
 
# Press the '''Play''' button.
 
# Press the '''Play''' button.
 +
 +
====Playback Speed====
 +
* While playing an audio file the speed can be changed from 50% to 400%.
 +
* During playback the up and down arrow button on the front right of the recorder adjust the playback speed.
 +
* Leave it set to 100%.
  
 
===Copying Files===
 
===Copying Files===
# Connect provided USB cable to the computer.
+
# With the Olympus turned off, connect it to a computer using the provided USB cable.
# Turn on the recorder.
+
# Turn on the Olympus.
 
# The recorder should appear on the desktop as '''LS-100'''.
 
# The recorder should appear on the desktop as '''LS-100'''.
#Copy files from the audio recorder to a computer as you would from a USB drive. Protect the privacy of your recordings by deleting all files on the recorder before returning equipment to Media Loan.
+
#Copy files from the audio recorder to a computer as you would from a USB drive. Protect the privacy of your recordings by deleting all files on the recorder before returning equipment to Media Loan.  You can do this while the device is connected to the computer or by "formatting" the internal memory through the process illustrated in the Record Settings section above.
#When finished click and drag the device icon to the trash before turning off the recorder.
+
#When finished, "Eject" the device from your computer, shut down the Olympus, and pack it away properly in the case. Don't forget the USB cable!
  
  
  
 
'''Get proficiency sign in sheet.'''
 
'''Get proficiency sign in sheet.'''
 
 
 
  
 
[[category:Audio Recording]]
 
[[category:Audio Recording]]
 
[[category:Audio Editing]]
 
[[category:Audio Editing]]
 +
[[category:Media Workshop Outlines]]

Revision as of 16:27, 7 October 2019

Media Loan

  • www.evergreen.edu/medialoan
  • Bring your Evergreen ID with the current quarter sticker.
  • Make a reservation for equipment, stop by Lib. 2504, or call (360) 867-6253.
  • Test and confirm all equipment is in working order before leaving Media Loan.
  • Media Loan has SEVERE LATE FINES. Return equipment on time, or call to make a renewal. Follow up with an appeal form to negate late fines.


Late Fines assessed daily, per item
Equipment valued over $250 — $20.00 per day
Equipment valued under $250 — $10.00 per day
Keys and all equipment and accessories valued over $50 — $10.00 per day
Equipment and accessories valued under $50 — $5.00 per day

Media Loan Microphone Guide and Microphone Basics

Olympus LS-100 Operating Guide


Audio Basics

Levels

  • Mic level: Microphones have a low level signal.
  • Line level: Devices such as mixers, CD players, iPods are in the higher line level range.

Microphones

Microphone Types

  • Dynamic Mics
    • Can withstand louder noises, rugged pickup elements.
    • No power needed
  • Condenser Mics
    • More sensitive to quieter noises, and more delicate pickup elements.
    • Needs power supplied through a battery, or through phantom power on the recorder.

Microphone Pickup Patterns

  • Omni: picks up sound from all directions.
  • Cardioid: picks up sound from front:
    • Proximity Effect: low frequencies are boosted as mic is closer to the source.
  • Super-Cardioid: Picks up from front with a narrower pattern.

Microphones Categories

  • Handheld
  • Lavaliere: small clip-on attaches to clothing for vocal only recording.

Connector Types

  1. XLR = for professional balanced microphones.
  2. Mini or 1/8 inch = consumer microphones.

Recording Tips

Mic Usage Tips

  • Use a stand if possible to reduce noise (table, or floor)
  • Listen for:
    • handling noise
    • proximity effect
    • popped p's
  • Signal to noise ratio
    • The closer you are to your source with your microphone the higher the signal to noise ratio
    • The further away you are from your source the more unwanted noise gets into your recording.
  • Perspective
    • Close up recordings produce isolated sounds which enhances the texture of certain objects and provides a narrow and close up perspective.
    • Recording at distances provides width and depth to your sounds which can provide clues to location, combined actions of objects, weather, ambiance, time of day, etc.

Headphones

  • Always use headphones.
  • If you are only using one of the two XLR inputs, you will only hear sound on one side of the headphones.

Media Loan Shopping List

  • Olympus LS-100
  • XLR cables (AKA "Mic Cables")
  • Headphones
  • Desk stand / floor stand / microphone handle (that can screw into the back of the Olympus)
  • Microphones:
    • Recommended for vocal recording > SM-58, SM-57, Sennheiser 421, AT8537 Lavaliere
  • Extension cords (Optional: Only needed if you want your Olympus to be connected to power while you are recording, and you are not nearby a wall outlet)



Olympus LS-100 Recorder

  • Digital audio recorder that records to flash memory cards, no moving parts.
  • It has 4 GB's of internal memory or you can use your own SD card.
  • Up to 96kHz/24-bit linear PCM (.wav) recording.
  • Two built-in condenser microphones arranged in an X-Y configuration for stereo recording.
  • Left & right XLR / phone combo inputs and a stereo mini mic input.
  • When you are done recording, you copy files to your computer as though you were using an external USB drive.

Record Settings

These settings will enable the recorder to use both (2) XLR inputs with manual record level:

  1. Menu > Record Mode > Normal
  2. Menu > Mic Gain > XLR (L) > HI
  3. Menu > Mic Gain > XLR (R) > HI
  4. Menu > Rec Level > XLR (L) > Manual > Limit/Comp Off OR Limiter 1/2 if you want extra protection from clipping your recorded audio
  5. Menu > Rec Level > XLR (R) > Manual > Limit/Comp Off OR Limiter 1/2 if you want extra protection from clipping your recorded audio
  6. Menu > Input Select > XLR/Phone
  7. Menu > Rec Format > PCM > 48.0 Khz / 24 Bit
  8. Menu > Low Cut Filter > 100Hz or OFF
  9. Menu > Pre-Recording > Off
  10. Menu > Rec Monitor > On (this allows you to listen to audio in your headphones while recording)

Other settings to take note of:

  1. Menu > Press the Right button ( >>| ) four times to get to the LCD/Sound Menu screen
  2. LCD/Sound Menu > Backlight > Lighting Time > Always on (this keeps your display from turning off)
  3. LCD/Sound Menu > Beep > Press the Down button ( - ) until the number reads as "00" (this mutes the beep sound when pressing buttons)
  4. LCD/Sound Menu > Voice Guide > On/Off > Off (If you do not want your device to talk to you every time you press a button, turn Voice Guide OFF)
  5. Menu > Press the Right button ( >>| ) five times to get to the Device Menu screen
  6. Device Menu > Time & Date > Use the Left/Right/Up/Down buttons to set Time & Date (this can be helpful when reviewing your unnamed files later)
  7. Device Menu > Format > Internal Memory > Start > Start (Formatting means all files will be deleted off of the device, so only do this when you first check out your recorder and after you have safely stored your own recorded files onto a computer and/or other devices)

USB and Power Settings

The USB Connection setting needs to be changed to either connect the recorder to a computer or to power the recorder from AC while recording.
There are 3 options:

  • PC: allows the recorder to be connected to a computer. Can be used to charge the batteries.
  • AC Adapter: allows the recorder to be in record mode while connected to AC. Can be used to charge the batteries.
  • Optional: anytime the recorder is connected to a computer or the AC Adaptor it will display a menu to select PC or AC Adapter. Use this setting.
  1. Press the MENU button
  2. Forward through the tabs to the DEVICE MENU
  3. Press the - button down to select USB Settings and press OK.
  4. Select USB Connection and press OK.
  5. Select Optional and press OK.

Recording Exercise

Recording Tips

  1. Select a controlled and quiet recording location.
  2. Avoid noisy public locations (like restaurants, or areas near a road).
  3. If possible, eliminate background noises (turn off stereos, TV’s, fans, air circulation vents). A room with carpeting and furniture will typically sound better than one with hard floors (too much echo).
  4. It is recommended to record some "Room Tone" to be able to insert any pauses needed later in post-production
    • To record proper "Room Tone," setup your mics roughly where they will be placed during the recording, then record 30 seconds of "silence" to capture the ambient noise in the room. Not only can this help you when inserting pauses during the editing process, it can also help you should you need to run a "noise removal" process.

Getting the Device Prepared for Recording

  1. Insert the battery.
  2. Turn on recorder.
  3. Format card.
  4. Check menu options as listed in the above "Record Settings" section:
    • Make sure to set device to record at 48 kHz / 24 bit PCM
  5. Plug in headphones. Ensure that the Rec Monitor is on.
  6. Connect a microphone to the recorder's left XLR input.

Make a Test Recording

  1. Press Rec button once - this will put the Olympus in "record-pause" mode, which will allow you to hear the microphone without actually recording.
  2. Test the microphone placement, confirm if you are hearing the built-in mics, or the external mic you have attached.
    • Are you hearing any crackles, or hums, room noise? Too close, too far away from the sound source?
  3. Set levels with the record level controls on the right of the recorder. At their loudest, levels should not exceed -12dB to -6dB.
  4. Press Rec again to start the recording (check that the counter is running, and that the record light is solid).
  5. Listen on the headphones. If you are only using the left XLR input, you will only hear audio on the left headphone.
  6. Press Stop to stop recording

Playback the Recording

  1. Press the List button.
  2. Use the + and - buttons to select a file and press OK.
  3. The file name will be displayed in the window.
  4. Press the Play button.

Playback Speed

  • While playing an audio file the speed can be changed from 50% to 400%.
  • During playback the up and down arrow button on the front right of the recorder adjust the playback speed.
  • Leave it set to 100%.

Copying Files

  1. With the Olympus turned off, connect it to a computer using the provided USB cable.
  2. Turn on the Olympus.
  3. The recorder should appear on the desktop as LS-100.
  4. Copy files from the audio recorder to a computer as you would from a USB drive. Protect the privacy of your recordings by deleting all files on the recorder before returning equipment to Media Loan. You can do this while the device is connected to the computer or by "formatting" the internal memory through the process illustrated in the Record Settings section above.
  5. When finished, "Eject" the device from your computer, shut down the Olympus, and pack it away properly in the case. Don't forget the USB cable!


Get proficiency sign in sheet.