Difference between revisions of "Olympus LS-100 Multi-Track PCM Recorder Operating Guide"

From Help Wiki
(Connect to Computer)
 
(17 intermediate revisions by 4 users not shown)
Line 1: Line 1:
'''A proficiency test is required to check out this recorder.''' Schedule a proficiency at the front desk of Media Loan or by calling 360-867-6253. Read this operating guide and complete the written portion of the [[Olympus LS-100 Proficiency Test]] prior to your scheduled proficiency. Bring your answer sheet with you to the test, which should take approximately 30 - 45 minutes. (Please note: if you have a proficiency in the Zoom and Marantz recorders, you will still have to take the [[Olympus LS-100 Proficiency Test|proficiency test]] for the Olympus LS-100.)   
+
<big>'''A proficiency test is required to check out this recorder.''' Schedule a proficiency at the front desk of Media Loan or by calling 360-867-6253. Read this operating guide and complete the written portion of the [[Olympus LS-100 Proficiency Test]] prior to your scheduled proficiency. '''Bring your answer sheet with you to the test''', which should take approximately 30 - 45 minutes. (Please note: if you have a proficiency in the Zoom you will still have to take the [[Olympus LS-100 Proficiency Test|proficiency test]] for the Olympus LS-100.)</big>    
  
This operating guide is not a substitute for the complete manual, which you can download here: [http://www.evergreen.edu/medialoan/docs/audio_manual_LS-100.pdf Olympus LS-100 Manual]
+
[[File:LS-100-top.jpg|left]]
  
=== About Media Loan's Olympus LS-100 ===
+
<big>'''About Media Loan's Olympus LS-100'''
 
* 96kHz/24 bit linear PCM recording  
 
* 96kHz/24 bit linear PCM recording  
 
* Supports linear PCM & MP3 audio formats
 
* Supports linear PCM & MP3 audio formats
Line 10: Line 10:
 
* Left & right XLR / phone combo inputs
 
* Left & right XLR / phone combo inputs
 
* Multi-track recording & editing
 
* Multi-track recording & editing
 +
 +
 
:::'''DO NOT drop, submit to extreme temperatures, or get wet.'''<br />
 
:::'''DO NOT drop, submit to extreme temperatures, or get wet.'''<br />
:::'''You are 100% financially responsible for all equipment checked out from Media Loan.'''
+
:::'''You are 100% financially responsible for all equipment checked out from Media Loan.''' </big>
 +
:::
 +
:::
 +
 
 +
 
 +
<big>'''List of Gear Commonly Paired With the Olympus LS-100'''</big>
 +
<big>
 +
* XLR cables (Mic Cables
 +
* Headphones
 +
* Desk stands, floor stands, microphone handles (that can screw into the back of the Olympus)
 +
* Microphones</big>
 +
:::
 +
:::
  
 
===Name of Each Part===
 
===Name of Each Part===
Line 23: Line 37:
  
 
=== Internal Memory ===
 
=== Internal Memory ===
Internal Memory = 4Gb<br> PCM WAV 48.0 kHz/16 bit = 4 hours 45 min<br> PCM WAV 48.0 kHz/24 bit = 3 hours<br> PCM WAV 44.1 kHz/16 bit = 5 hours<br> PCM WAV 44.1 kHz/24 bit = 3 hours 15 min<br> MP3 320 kbps = 22 hours 30 min<br> Purchasing your own 8Gb card will give you 2X as much recording time.
+
<big>Internal Memory = 4Gb<br> PCM WAV 48.0 kHz/16 bit = 4 hours 45 min<br> PCM WAV 48.0 kHz/24 bit = 3 hours<br> PCM WAV 44.1 kHz/16 bit = 5 hours<br> PCM WAV 44.1 kHz/24 bit = 3 hours 15 min<br> MP3 320 kbps = 22 hours 30 min<br> Purchasing your own 8Gb card will give you 2X as much recording time.</big>
  
 
=== Inserting an SD Card ===
 
=== Inserting an SD Card ===
If you purchase your own SD card to use with the Olympus LS-100:
+
<big>If you purchase your own SD card to use with the Olympus LS-100:
 
* Slide the lock switch to '''OPEN''' when the recorder is stopped and open the SD card cover.
 
* Slide the lock switch to '''OPEN''' when the recorder is stopped and open the SD card cover.
 
* Insert the SD card with the terminal face facing up, as shown in the figure.
 
* Insert the SD card with the terminal face facing up, as shown in the figure.
Line 36: Line 50:
 
* Press '''OK'''.
 
* Press '''OK'''.
 
* To remove, push card in all the way then pull out.
 
* To remove, push card in all the way then pull out.
<gallery>
+
Note: Media Loan '''does not''' circulate memory cards for patrons to checkout.<gallery>
 
File:Ls-100 6 insert-sd-card.png|Insert SC Card
 
File:Ls-100 6 insert-sd-card.png|Insert SC Card
 
File:Ls-100 6 insert-sd-card 2.png| 1- Left/Right, 2 - Up/Down, 3 - OK
 
File:Ls-100 6 insert-sd-card 2.png| 1- Left/Right, 2 - Up/Down, 3 - OK
File:Ls-100 6 insert-sd-card3.png|
+
File:Ls-100 6 insert-sd-card3.png|</big>
 
</gallery>
 
</gallery>
  
 
=== Battery ===
 
=== Battery ===
 +
<big>
 
# Slide the lock switch to '''OPEN''' on the battery cover.
 
# Slide the lock switch to '''OPEN''' on the battery cover.
 
# Insert the battery so that the direction of the arrow (label) on the recorder matches the direction of the arrow on the battery.
 
# Insert the battery so that the direction of the arrow (label) on the recorder matches the direction of the arrow on the battery.
Line 48: Line 63:
 
<gallery>
 
<gallery>
 
File:Ls-100 3 insertbattery1.png|Unlock Battery Cover
 
File:Ls-100 3 insertbattery1.png|Unlock Battery Cover
File:Ls-100 3 insertbattery2.png|Insert Battery
+
File:Ls-100 3 insertbattery2.png|Insert Battery</big>
 
</gallery>
 
</gallery>
  
 
===USB and Power Settings===
 
===USB and Power Settings===
The '''USB Connection''' setting needs to be changed to either connect the recorder to a computer or to power the recorder from AC while recording. </br>
+
<big>The '''USB Connection''' setting needs to be changed to either connect the recorder to a computer or to power the recorder from AC while recording. <br>
 
There are 3 options:
 
There are 3 options:
 
*  '''PC''': allows the recorder to be connected to a computer.  Can be used to charge the batteries.
 
*  '''PC''': allows the recorder to be connected to a computer.  Can be used to charge the batteries.
 
* '''AC Adapter''': allows the recorder to be in record mode while connected to AC.  Can be used to charge the batteries.
 
* '''AC Adapter''': allows the recorder to be in record mode while connected to AC.  Can be used to charge the batteries.
* '''Optional''':  anytime the recorder is connected to a computer or the AC Adaptor it will display a menu to select '''PC''' or '''AC Adapter'''.  Use this setting.
+
* '''Optional''':  anytime the recorder is connected to a computer or the AC Adaptor it will display a menu to select '''PC''' or '''AC Adapter'''.  Use this setting.</big>
  
 +
<big>
 
# Press the '''MENU''' button  
 
# Press the '''MENU''' button  
 
# Forward through the tabs to the '''DEVICE MENU'''  
 
# Forward through the tabs to the '''DEVICE MENU'''  
 
# Press the '''-''' button down to select '''USB Settings''' and press '''OK'''.
 
# Press the '''-''' button down to select '''USB Settings''' and press '''OK'''.
 
# Select  '''USB Connection''' and press '''OK'''.
 
# Select  '''USB Connection''' and press '''OK'''.
# Select  '''Optional''' and press '''OK'''.
+
# Select  '''Optional''' and press '''OK'''.</big>
  
=== Formatting the Recorder/SD Card and Erasing All Data ===
+
=== Formatting the Internal Memory of the Recorder/SD Card and Erasing All Data ===
Perform this function before every use to ensure maximum file space on the recorder/SD card and to erase all data before turning it back in to Media Loan.
+
<big>Perform this function before every use to ensure maximum file space on the recorder/SD card and to erase all data before turning it back in to Media Loan.
 
#Press the '''MENU''' button  
 
#Press the '''MENU''' button  
 
#Forward through the tabs to the '''DEVICE MENU'''  
 
#Forward through the tabs to the '''DEVICE MENU'''  
 
#Press the '''-''' button down to select '''FORMAT''' and press '''OK'''.
 
#Press the '''-''' button down to select '''FORMAT''' and press '''OK'''.
 
#Select '''Internal Memory''' or SD Card (You must provide your own card) and press '''OK'''.
 
#Select '''Internal Memory''' or SD Card (You must provide your own card) and press '''OK'''.
#Select '''Start''', and press '''OK'''.
+
#Select '''Start''', and press '''OK'''.</big>
  
  
 
=== Connect Microphones ===
 
=== Connect Microphones ===
 
<gallery>
 
<gallery>
File:Ls-100 2 micconnect1.png|Select
+
<big>File:Ls-100 2 micconnect1.png|Select
File:Ls-100 2 micconnect2.png|Inputs
+
File:Ls-100 2 micconnect2.png|Inputs</big>
 
</gallery>
 
</gallery>
 
=== Connect to Computer ===
 
=== Connect to Computer ===
 
<gallery>
 
<gallery>
File:Ls-100 4 connect-to-computer.png|Connect to Computer
+
<big>File:Ls-100 4 connect-to-computer.png|Connect to Computer
File:Ls-100 4 connect-to-computer2.png|Connect to Unit
+
File:Ls-100 4 connect-to-computer2.png|Connect to Unit</big>
 
</gallery>
 
</gallery>
  
Line 88: Line 104:
 
====Playback the Recording====
 
====Playback the Recording====
  
 +
<big>
 
# Press the '''List''' button.
 
# Press the '''List''' button.
 
# Use the '''+''' and '''-''' buttons to select a file and press '''OK'''.
 
# Use the '''+''' and '''-''' buttons to select a file and press '''OK'''.
 
# The file name will be displayed in the window.   
 
# The file name will be displayed in the window.   
 
# Press the '''Play''' button.
 
# Press the '''Play''' button.
 +
</big>
  
 
====Playback Speed====
 
====Playback Speed====
 +
<big>
 
* While playing an audio file the speed can be changed from 50% to 400%.
 
* While playing an audio file the speed can be changed from 50% to 400%.
 
* During playback the up and down arrow button on the front right of the recorder adjust the playback speed.
 
* During playback the up and down arrow button on the front right of the recorder adjust the playback speed.
* Leave it set to 100%.
+
* Leave it set to 100%.</big>
  
 
=== The Menu System ===
 
=== The Menu System ===
'''Press the MENU button'''
+
<big>'''Press the MENU button'''</big>
 
==== Record Menu ====
 
==== Record Menu ====
 
===== Record Mode =====
 
===== Record Mode =====
 +
<big>
 
*'''Normal''' - each microphone that is being used to record produces it's respective track.
 
*'''Normal''' - each microphone that is being used to record produces it's respective track.
 
*'''Overdub''' - The live microphone is mixed with the file that is being played back. The original file does not get erased.
 
*'''Overdub''' - The live microphone is mixed with the file that is being played back. The original file does not get erased.
 
*'''Play Sync''' - This allows you to playback a file and while only the live microphone is recorded.   
 
*'''Play Sync''' - This allows you to playback a file and while only the live microphone is recorded.   
*'''V-Sync Rec''' - a feature that automatically starts a recording when the recorder detects a sound louder than the voice sync level (detection level) setting; when the sound level decreases, recording stops automatically.
+
*'''V-Sync Rec''' - a feature that automatically starts a recording when the recorder detects a sound louder than the voice sync level (detection level) setting; when the sound level decreases, recording stops automatically.</big>
  
 
===== Mic Gain =====
 
===== Mic Gain =====
'''Mic Gain''' this option let's you adjust the sensitivity of the selected mic
+
<big>'''Mic Gain''' this option let's you adjust the sensitivity of the selected mic
 
*Built-in Mic - Hi (preferable), Mid, Lo
 
*Built-in Mic - Hi (preferable), Mid, Lo
 
*External Mic - Hi (preferable), Mid, Lo
 
*External Mic - Hi (preferable), Mid, Lo
 
*XLR L  - Hi or Lo
 
*XLR L  - Hi or Lo
*XLR R  - Hi or Lo
+
*XLR R  - Hi or Lo</big>
 
=====Record Level=====
 
=====Record Level=====
 +
<big>
 
*Manual - let's you adjust the recording manually. Preferred.
 
*Manual - let's you adjust the recording manually. Preferred.
 
*Auto - the recording level is adjusted automatically.
 
*Auto - the recording level is adjusted automatically.
# Press the '''REC''' button to enter the recording standby mode.
+
*Press the '''REC''' button to enter the recording standby mode.
# Adjust the '''REC LEVEL''' dial according to the sound source.
+
*Adjust the '''REC LEVEL''' dial according to the sound source.
* The '''REC LEVEL''' dial can separately adjust the level of the input source for the L/R channels.
+
*The '''REC LEVEL''' dial can separately adjust the level of the input source for the L/R channels.</big>
 
<gallery>
 
<gallery>
File:Ls-100 7 adjust-rec-level.png|Adjust Record Level
+
<big>File:Ls-100 7 adjust-rec-level.png|Adjust Record Level
File:Ls-100 7 adjust-rec-level2.png|Adjust Record Level
+
File:Ls-100 7 adjust-rec-level2.png|Adjust Record Level</big>
 
</gallery>
 
</gallery>
 
===== Input Select =====
 
===== Input Select =====
 +
<big>
 
*Built-in Mic - sound is input through the built-in stereo microphone.
 
*Built-in Mic - sound is input through the built-in stereo microphone.
 
*External Mic - sound is input by connecting an external microphone to the MIC jack.
 
*External Mic - sound is input by connecting an external microphone to the MIC jack.
 
*Line - sound is input by connecting an external unit to the MIC jack.
 
*Line - sound is input by connecting an external unit to the MIC jack.
*XLR/Phone - sound is input through a musical instrument or the microphone connected to the XLR/standard phone combo jack.
+
*XLR/Phone - sound is input through a musical instrument or the microphone connected to the XLR/standard phone combo jack.</big>
 
===== Mic Power =====
 
===== Mic Power =====
*Phantom power - +48V or 24V This setting sets the voltage of the phantom power. Set to +48V.   
+
<big>
*Plug in power - ON/OFF This supplies power over the stereo-mini mic input to certain mics.
+
*Phantom power - +48V or 24V This setting sets the voltage of the phantom power. Set to +48V.
 +
**Once you have selected your phantom power voltage, you may still need to flip the switch on the left side of the device to enable the power to flow our each XLR separately.   
 +
*Plug in power - ON/OFF This supplies power over the stereo-mini(3.5mm) mic input to certain mics.</big>
  
 
===== Rec Format =====
 
===== Rec Format =====
 +
<big>
 
*PCM WAV 48.0kHz/24bit - Ideal selection for high quality sound files.
 
*PCM WAV 48.0kHz/24bit - Ideal selection for high quality sound files.
*MP3 - highly compressed and less desirable.
+
*MP3 - highly compressed and less desirable.</big>
 
===== Low Cut Filter =====
 
===== Low Cut Filter =====
This cuts low frequencies to reduce handling noise and unwanted bass-like sounds. Select the frequency you want the cut-off to start at.
+
<big>This cuts low frequencies to reduce handling noise and unwanted bass-like sounds. Select the frequency you want the cut-off to start at.
 
*100Hz  
 
*100Hz  
*300Hz  
+
*300Hz</big>
 
===== Pre-Recording =====
 
===== Pre-Recording =====
This records 2 seconds prior to you pressing the record button
+
<big>This records 2 seconds prior to you pressing the record button
*On/Off  
+
*On/Off</big>
 
===== Rec Monitor =====
 
===== Rec Monitor =====
*On/Off - turns On or Off the EAR jack
+
<big>*On/Off - turns On or Off the EAR jack</big>
 
==== PLAY MENU ====
 
==== PLAY MENU ====
 +
<big>
 
*Play Mode - one file or list  
 
*Play Mode - one file or list  
*Skip Space - Forward skip, Reverse skip
+
*Skip Space - Forward skip, Reverse skip</big>
 
<gallery>
 
<gallery>
File:Ls-100-x-play-screen.png|Play Screen
+
<big>File:Ls-100-x-play-screen.png|Play Screen</big>
 
</gallery>
 
</gallery>
 
==== FILE MENU ====
 
==== FILE MENU ====
 +
<big>
 
*File Lock - On/Off  
 
*File Lock - On/Off  
 
*Move/Copy - Copies and moves the files within the memory  
 
*Move/Copy - Copies and moves the files within the memory  
Line 157: Line 184:
 
*MP3 Convert - converts a PCM WAV into an MP3 format file  
 
*MP3 Convert - converts a PCM WAV into an MP3 format file  
 
*CD Write - Directly writes a PCM WAV format file into a CD  
 
*CD Write - Directly writes a PCM WAV format file into a CD  
*Bounce - Saves all the tracks in a multi-track mode project to one file
+
*Bounce - Saves all the tracks in a multi-track mode project to one file</big>
 
<gallery>
 
<gallery>
File:Ls-100-x-file-screen.png|File Screen
+
<big>File:Ls-100-x-file-screen.png|File Screen</big>
 
</gallery>
 
</gallery>
 
==== Metronome Menu ====
 
==== Metronome Menu ====
 +
<big>
 
*On/Off
 
*On/Off
 
*Display - On/Off
 
*Display - On/Off
Line 168: Line 196:
 
*Sound - Metronome 1 (vibrato), Metronome 2 (moderato)
 
*Sound - Metronome 1 (vibrato), Metronome 2 (moderato)
 
*Pattern - 1/1, 1/4, 2/4, 3/4, 4/4, 6/4, 8/4, 6/8
 
*Pattern - 1/1, 1/4, 2/4, 3/4, 4/4, 6/4, 8/4, 6/8
*Volume - use the - or + button to adjust volume
+
*Volume - use the - or + button to adjust volume</big>
 
==== LCD/Sound Menu ====
 
==== LCD/Sound Menu ====
 +
<big>
 
*Backlight - lighting time, dim light time, brightness
 
*Backlight - lighting time, dim light time, brightness
 
*LED - On/Off
 
*LED - On/Off
Line 175: Line 204:
 
*Language - let's you change the language
 
*Language - let's you change the language
 
*Voice Guide - On/Off, Speed, Volume. The recorder will talk to you.
 
*Voice Guide - On/Off, Speed, Volume. The recorder will talk to you.
*Intro Play - 10 sec, 5 sec, 3 sec, OFF
+
*Intro Play - 10 sec, 5 sec, 3 sec, OFF</big>
 
==== Device Menu ====
 
==== Device Menu ====
 +
<big>
 
*Fn. Setting - function key menu. Let's you assign the F1, F2, F3 keys as a shortcut to menu options that you can choose from.
 
*Fn. Setting - function key menu. Let's you assign the F1, F2, F3 keys as a shortcut to menu options that you can choose from.
 
*Memory Select - allows you to choose from the 4Gb internal memory or to use the external memory slot in which you would provide your own SD card.
 
*Memory Select - allows you to choose from the 4Gb internal memory or to use the external memory slot in which you would provide your own SD card.
Line 187: Line 217:
 
*System info - Model/Version/Serial No.
 
*System info - Model/Version/Serial No.
 
<br>
 
<br>
'''Press the HOME button'''
+
'''Press the HOME button'''</big>
 
=== Tuner ===
 
=== Tuner ===
 +
<big>
 
*Calibration - the frequency of the reference tone A can be adjusted by 1Hz increments in the range of 435Hz to 445Hz.
 
*Calibration - the frequency of the reference tone A can be adjusted by 1Hz increments in the range of 435Hz to 445Hz.
 
*Chromatic Tuner - adjust the mismatch between the one of the musical instrument you have entered and the reference tone to ensure a proper response to all the musical scales.
 
*Chromatic Tuner - adjust the mismatch between the one of the musical instrument you have entered and the reference tone to ensure a proper response to all the musical scales.
 
*Guitar - tune to a guitar chords chart
 
*Guitar - tune to a guitar chords chart
*Bass - tune to a bass chords chart
+
*Bass - tune to a bass chords chart</big>
 
=== Metronome ===
 
=== Metronome ===
 +
<big>
 
*Let's you adjust beats per minute. You must enter the MENU system for more parameters.
 
*Let's you adjust beats per minute. You must enter the MENU system for more parameters.
 +
</big>
 
=== Recorder ===
 
=== Recorder ===
 +
<big>
 
*Let's you access the Normal Record mode, choose your folder, and select your input source.
 
*Let's you access the Normal Record mode, choose your folder, and select your input source.
 +
</big>
 
=== Multitrack ===
 
=== Multitrack ===
 +
<big>
 
*This mode allows you to separately record and playback different parts/sound sources.  
 
*This mode allows you to separately record and playback different parts/sound sources.  
 
*You can manage up to 8 tracks per project. Recorded tracks can be edited separately to adjust the output level or balance.
 
*You can manage up to 8 tracks per project. Recorded tracks can be edited separately to adjust the output level or balance.
*You can record over an existing track unlike the recorder mode. Edited tracks can be mixed (bounced) into a single file.
+
*You can record over an existing track unlike the recorder mode. Edited tracks can be mixed (bounced) into a single file.</big>
 
=== Lissajous ===
 
=== Lissajous ===
 +
<big>
 
*You must plug in two microphones to use this feature.
 
*You must plug in two microphones to use this feature.
*This helps you obtain the optimal positioning of a microphone in order to reduce phase.  Phase is the slight difference between two sound waves that is recorded by two different microphones which will produce a slight time difference between the two waveforms which could cancel out certain frequencies.
+
*This helps you obtain the optimal positioning of a microphone in order to reduce phase.  Phase is the slight difference between two sound waves that is recorded by two different microphones which will produce a slight time difference between the two waveforms which could cancel out certain frequencies.</big>
 
<gallery>
 
<gallery>
 
File:Ls-100-lissajous1.png|Lissajous
 
File:Ls-100-lissajous1.png|Lissajous
 
</gallery>
 
</gallery>
 
  [[category:Media Loan]]
 
  [[category:Media Loan]]
 +
===Helpful Menu Options===
 +
====<big>'''These settings will enable the recorder to use both (2) XLR inputs with manual record level:'''</big>====
 +
<big>
 +
# Menu > Record Mode > Normal
 +
# Menu > Mic Gain > XLR (L) > HI
 +
# Menu > Mic Gain > XLR (R) > HI
 +
# Menu > Rec Level > XLR (L) > Manual > Limit/Comp Off OR Limiter 1/2 if you want extra protection from clipping your recorded audio
 +
# Menu > Rec Level > XLR (R) > Manual > Limit/Comp Off OR Limiter 1/2 if you want extra protection from clipping your recorded audio
 +
# Menu > Input Select > XLR/Phone
 +
# Menu > Rec Format > PCM > 48.0 Khz / 24 Bit
 +
# Menu > Low Cut Filter > 100Hz
 +
# Menu > Pre-Recording > Off
 +
# Menu > Rec Monitor > On (this allows you to listen to audio in your headphones while recording)</big>
 +
 +
===='''These settings are good to take note of:'''====
 +
<big>
 +
# Menu > Press the Right button ( >>| ) four times to get to the LCD/Sound Menu screen
 +
# LCD/Sound Menu > Backlight > Lighting Time > Always on (this keeps your display from turning off)
 +
# LCD/Sound Menu > Beep > Press the Down button ( - ) until the number reads as "00" (this mutes the beep sound when pressing buttons)
 +
# LCD/Sound Menu > Voice Guide > On/Off > Off (If you do not want your device to talk to you every time you press a button, turn Voice Guide OFF)
 +
# Menu > Press the Right button ( >>| ) five times to get to the Device Menu screen
 +
# Device Menu > Time & Date > Use the Left/Right/Up/Down buttons to set Time & Date (this can be helpful when reviewing your unnamed files later)
 +
# Device Menu > Format > Internal Memory > Start > Start (Formatting means all files will be deleted off of the device, so only do this when you first check out your recorder and after you have safely stored your own recorded files onto a computer and/or other devices)
 +
</big>

Latest revision as of 16:14, 13 May 2020

A proficiency test is required to check out this recorder. Schedule a proficiency at the front desk of Media Loan or by calling 360-867-6253. Read this operating guide and complete the written portion of the Olympus LS-100 Proficiency Test prior to your scheduled proficiency. Bring your answer sheet with you to the test, which should take approximately 30 - 45 minutes. (Please note: if you have a proficiency in the Zoom you will still have to take the proficiency test for the Olympus LS-100.)

LS-100-top.jpg

About Media Loan's Olympus LS-100

  • 96kHz/24 bit linear PCM recording
  • Supports linear PCM & MP3 audio formats
  • Internal 4GB built-in flash memory
  • Two 90° stereo condenser microphones
  • Left & right XLR / phone combo inputs
  • Multi-track recording & editing


DO NOT drop, submit to extreme temperatures, or get wet.
You are 100% financially responsible for all equipment checked out from Media Loan.


List of Gear Commonly Paired With the Olympus LS-100

  • XLR cables (Mic Cables
  • Headphones
  • Desk stands, floor stands, microphone handles (that can screw into the back of the Olympus)
  • Microphones

Name of Each Part

Internal Memory

Internal Memory = 4Gb
PCM WAV 48.0 kHz/16 bit = 4 hours 45 min
PCM WAV 48.0 kHz/24 bit = 3 hours
PCM WAV 44.1 kHz/16 bit = 5 hours
PCM WAV 44.1 kHz/24 bit = 3 hours 15 min
MP3 320 kbps = 22 hours 30 min
Purchasing your own 8Gb card will give you 2X as much recording time.

Inserting an SD Card

If you purchase your own SD card to use with the Olympus LS-100:

  • Slide the lock switch to OPEN when the recorder is stopped and open the SD card cover.
  • Insert the SD card with the terminal face facing up, as shown in the figure.
  • If the SD card is inserted in the wrong direction or at an angle, the contact face may be damaged or the SD card may get stuck.
  • Recording cannot start unless the SD card is inserted all the way in.
  • After closing the SD card cover, slide the lock switch to LOCK.
  • When the SD card is inserted, the recording media switching screen appears.
  • To record data in the SD card, select Yes by pressing the + or button.
  • Press OK.
  • To remove, push card in all the way then pull out.
Note: Media Loan does not circulate memory cards for patrons to checkout.

Battery

  1. Slide the lock switch to OPEN on the battery cover.
  2. Insert the battery so that the direction of the arrow (label) on the recorder matches the direction of the arrow on the battery.
  3. Close the battery cover and slide the lock switch to LOCK.

USB and Power Settings

The USB Connection setting needs to be changed to either connect the recorder to a computer or to power the recorder from AC while recording.
There are 3 options:

  • PC: allows the recorder to be connected to a computer. Can be used to charge the batteries.
  • AC Adapter: allows the recorder to be in record mode while connected to AC. Can be used to charge the batteries.
  • Optional: anytime the recorder is connected to a computer or the AC Adaptor it will display a menu to select PC or AC Adapter. Use this setting.

  1. Press the MENU button
  2. Forward through the tabs to the DEVICE MENU
  3. Press the - button down to select USB Settings and press OK.
  4. Select USB Connection and press OK.
  5. Select Optional and press OK.

Formatting the Internal Memory of the Recorder/SD Card and Erasing All Data

Perform this function before every use to ensure maximum file space on the recorder/SD card and to erase all data before turning it back in to Media Loan.

  1. Press the MENU button
  2. Forward through the tabs to the DEVICE MENU
  3. Press the - button down to select FORMAT and press OK.
  4. Select Internal Memory or SD Card (You must provide your own card) and press OK.
  5. Select Start, and press OK.


Connect Microphones

Connect to Computer


Playback

Playback the Recording

  1. Press the List button.
  2. Use the + and - buttons to select a file and press OK.
  3. The file name will be displayed in the window.
  4. Press the Play button.

Playback Speed

  • While playing an audio file the speed can be changed from 50% to 400%.
  • During playback the up and down arrow button on the front right of the recorder adjust the playback speed.
  • Leave it set to 100%.

The Menu System

Press the MENU button

Record Menu

Record Mode

  • Normal - each microphone that is being used to record produces it's respective track.
  • Overdub - The live microphone is mixed with the file that is being played back. The original file does not get erased.
  • Play Sync - This allows you to playback a file and while only the live microphone is recorded.
  • V-Sync Rec - a feature that automatically starts a recording when the recorder detects a sound louder than the voice sync level (detection level) setting; when the sound level decreases, recording stops automatically.
Mic Gain

Mic Gain this option let's you adjust the sensitivity of the selected mic

  • Built-in Mic - Hi (preferable), Mid, Lo
  • External Mic - Hi (preferable), Mid, Lo
  • XLR L - Hi or Lo
  • XLR R - Hi or Lo
Record Level

  • Manual - let's you adjust the recording manually. Preferred.
  • Auto - the recording level is adjusted automatically.
  • Press the REC button to enter the recording standby mode.
  • Adjust the REC LEVEL dial according to the sound source.
  • The REC LEVEL dial can separately adjust the level of the input source for the L/R channels.
Input Select

  • Built-in Mic - sound is input through the built-in stereo microphone.
  • External Mic - sound is input by connecting an external microphone to the MIC jack.
  • Line - sound is input by connecting an external unit to the MIC jack.
  • XLR/Phone - sound is input through a musical instrument or the microphone connected to the XLR/standard phone combo jack.
Mic Power

  • Phantom power - +48V or 24V This setting sets the voltage of the phantom power. Set to +48V.
    • Once you have selected your phantom power voltage, you may still need to flip the switch on the left side of the device to enable the power to flow our each XLR separately.
  • Plug in power - ON/OFF This supplies power over the stereo-mini(3.5mm) mic input to certain mics.
Rec Format

  • PCM WAV 48.0kHz/24bit - Ideal selection for high quality sound files.
  • MP3 - highly compressed and less desirable.
Low Cut Filter

This cuts low frequencies to reduce handling noise and unwanted bass-like sounds. Select the frequency you want the cut-off to start at.

  • 100Hz
  • 300Hz
Pre-Recording

This records 2 seconds prior to you pressing the record button

  • On/Off
Rec Monitor

*On/Off - turns On or Off the EAR jack

PLAY MENU

  • Play Mode - one file or list
  • Skip Space - Forward skip, Reverse skip

FILE MENU

  • File Lock - On/Off
  • Move/Copy - Copies and moves the files within the memory
  • File Divide - Divides a file recorded on this device
  • Property - Displays information about a file or folder
  • MP3 Convert - converts a PCM WAV into an MP3 format file
  • CD Write - Directly writes a PCM WAV format file into a CD
  • Bounce - Saves all the tracks in a multi-track mode project to one file

Metronome Menu

  • On/Off
  • Display - On/Off
  • Countdown
  • Tempo - lets you adjust using the + or - buttons
  • Sound - Metronome 1 (vibrato), Metronome 2 (moderato)
  • Pattern - 1/1, 1/4, 2/4, 3/4, 4/4, 6/4, 8/4, 6/8
  • Volume - use the - or + button to adjust volume

LCD/Sound Menu

  • Backlight - lighting time, dim light time, brightness
  • LED - On/Off
  • Beep - lets you adjust the beep volume that occurs when any buttons are pressed
  • Language - let's you change the language
  • Voice Guide - On/Off, Speed, Volume. The recorder will talk to you.
  • Intro Play - 10 sec, 5 sec, 3 sec, OFF

Device Menu

  • Fn. Setting - function key menu. Let's you assign the F1, F2, F3 keys as a shortcut to menu options that you can choose from.
  • Memory Select - allows you to choose from the 4Gb internal memory or to use the external memory slot in which you would provide your own SD card.
  • Power Save - turns the recorder Off after a selected amount of time (5min, 10min, 30min, 1hour, or OFF)
  • Time & Date - let's you adjust the time and date which can be helpful in file management
  • USB Setting - Let's you choose from PC, AC adapter, Optional
  • Reset Setting - Resets the settings to default
  • Format - Formats the selected memory and erases all files
  • Memory info - Displays the remaining memory and capacity
  • System info - Model/Version/Serial No.


Press the HOME button

Tuner

  • Calibration - the frequency of the reference tone A can be adjusted by 1Hz increments in the range of 435Hz to 445Hz.
  • Chromatic Tuner - adjust the mismatch between the one of the musical instrument you have entered and the reference tone to ensure a proper response to all the musical scales.
  • Guitar - tune to a guitar chords chart
  • Bass - tune to a bass chords chart

Metronome

  • Let's you adjust beats per minute. You must enter the MENU system for more parameters.

Recorder

  • Let's you access the Normal Record mode, choose your folder, and select your input source.

Multitrack

  • This mode allows you to separately record and playback different parts/sound sources.
  • You can manage up to 8 tracks per project. Recorded tracks can be edited separately to adjust the output level or balance.
  • You can record over an existing track unlike the recorder mode. Edited tracks can be mixed (bounced) into a single file.

Lissajous

  • You must plug in two microphones to use this feature.
  • This helps you obtain the optimal positioning of a microphone in order to reduce phase. Phase is the slight difference between two sound waves that is recorded by two different microphones which will produce a slight time difference between the two waveforms which could cancel out certain frequencies.

Helpful Menu Options

These settings will enable the recorder to use both (2) XLR inputs with manual record level:

  1. Menu > Record Mode > Normal
  2. Menu > Mic Gain > XLR (L) > HI
  3. Menu > Mic Gain > XLR (R) > HI
  4. Menu > Rec Level > XLR (L) > Manual > Limit/Comp Off OR Limiter 1/2 if you want extra protection from clipping your recorded audio
  5. Menu > Rec Level > XLR (R) > Manual > Limit/Comp Off OR Limiter 1/2 if you want extra protection from clipping your recorded audio
  6. Menu > Input Select > XLR/Phone
  7. Menu > Rec Format > PCM > 48.0 Khz / 24 Bit
  8. Menu > Low Cut Filter > 100Hz
  9. Menu > Pre-Recording > Off
  10. Menu > Rec Monitor > On (this allows you to listen to audio in your headphones while recording)

These settings are good to take note of:

  1. Menu > Press the Right button ( >>| ) four times to get to the LCD/Sound Menu screen
  2. LCD/Sound Menu > Backlight > Lighting Time > Always on (this keeps your display from turning off)
  3. LCD/Sound Menu > Beep > Press the Down button ( - ) until the number reads as "00" (this mutes the beep sound when pressing buttons)
  4. LCD/Sound Menu > Voice Guide > On/Off > Off (If you do not want your device to talk to you every time you press a button, turn Voice Guide OFF)
  5. Menu > Press the Right button ( >>| ) five times to get to the Device Menu screen
  6. Device Menu > Time & Date > Use the Left/Right/Up/Down buttons to set Time & Date (this can be helpful when reviewing your unnamed files later)
  7. Device Menu > Format > Internal Memory > Start > Start (Formatting means all files will be deleted off of the device, so only do this when you first check out your recorder and after you have safely stored your own recorded files onto a computer and/or other devices)