Difference between revisions of "Phone Recording Setup - Mixing Bench"

Revision as of 09:36, 6 October 2014

<pdf width="800" height="500">File:Ccpflow.pdf</pdf>

@@ Line 1: / Line 1: @@
 <pdf width="800" height="500">File:Ccpflow.pdf</pdf>
-===Phone Interview Cheat Sheet:===
-# Set up using a microphone. Recording into your DAW with caller and receiver on separate tracks.
-# Plug mic into channel 1 of the mixer, set trim, turn up fader, hard pan left, turn aux 1 to noon,
-# Make sure aux one master is at noon.
-# Patch phone hybrid out C 15 into mic/line input 2 B 16
-# Patch phone hybrid in D15 into aux send 1 into A 21
-# On mixer, Set Channel 2 trim to +4 line level 9 o'clock, hard pan right, push fader up
-# Put Main Mix Faders up to unity
-# Patch Mixer Main L and R OUT into MBOX IN 1 and 2 to record to separate channels in Protools.
-# Open DAW and set track 1 input to 1 mono, Set track 2 input to 2 mono.
-# JK Audio Inline patch settings:
-**a. FROM PHONE; TURN ''DOWN'' ALL THE WAY
-**B. SEPERATION: TURN ''UP'' ALL THE WAY
-**C. FROM LINE: ''NOON''
-**D. SEND: ''UP'' ALL THE WAY
-**E. SET TOGGLE TO ''OFF-HOOK MODE''
 ===MAKE THE CALL, AFTER THEY ANSWER, HANG UP THE PHONE AND USE THE MIC AND HEADPHONES.===
 ===TURN DOWN THE ROOM MONITORS.===