Difference between revisions of "Phone Recording Setup - Mixing Bench"

From Help Wiki
(Phone Interview Cheat Sheet:)
(Phone Interview Cheat Sheet:)
Line 1: Line 1:
 
<pdf width="800" height="500">File:Ccpflow.pdf</pdf>
 
<pdf width="800" height="500">File:Ccpflow.pdf</pdf>
===Phone Interview Cheat Sheet:===
 
 
# Set up using a microphone. Recording into your DAW with caller and receiver on separate tracks.
 
# Plug mic into channel 1 of the mixer, set trim, turn up fader, hard pan left, turn aux 1 to noon,
 
# Make sure aux one master is at noon.
 
# Patch phone hybrid out C 15 into mic/line input 2 B 16
 
# Patch phone hybrid in D15 into aux send 1 into A 21
 
# On mixer, Set Channel 2 trim to +4 line level 9 o'clock, hard pan right, push fader up
 
# Put Main Mix Faders up to unity
 
# Patch Mixer Main L and R OUT into MBOX IN 1 and 2 to record to separate channels in Protools.
 
# Open DAW and set track 1 input to 1 mono, Set track 2 input to 2 mono.
 
# JK Audio Inline patch settings:
 
**a. FROM PHONE; TURN ''DOWN'' ALL THE WAY
 
**B. SEPERATION: TURN ''UP'' ALL THE WAY
 
**C. FROM LINE: ''NOON''
 
**D. SEND: ''UP'' ALL THE WAY
 
**E. SET TOGGLE TO ''OFF-HOOK MODE''
 
 
 
===MAKE THE CALL, AFTER THEY ANSWER, HANG UP THE PHONE AND USE THE MIC AND HEADPHONES.===
 
===MAKE THE CALL, AFTER THEY ANSWER, HANG UP THE PHONE AND USE THE MIC AND HEADPHONES.===
 
===TURN DOWN THE ROOM MONITORS.===
 
===TURN DOWN THE ROOM MONITORS.===

Revision as of 09:36, 6 October 2014

<pdf width="800" height="500">File:Ccpflow.pdf</pdf>

MAKE THE CALL, AFTER THEY ANSWER, HANG UP THE PHONE AND USE THE MIC AND HEADPHONES.

TURN DOWN THE ROOM MONITORS.