Phone Recording Setup - Mixing Bench

From Help Wiki
Revision as of 08:38, 6 October 2014 by Vergaraz (Talk | contribs)

<pdf width="800" height="500">File:Ccpflow.pdf</pdf>

Phone Interview Cheat Sheet:

  1. Set up using a microphone. Recording into your DAW with caller and receiver on separate tracks.
  2. Plug mic into channel 1 of the mixer, set trim, turn up fader, hard pan left, turn aux 1 to noon,
  3. Make sure aux one master is at noon.
  4. Patch phone hybrid out C 15 into mic/line input 2 B 16
  5. Patch phone hybrid in D15 into aux send 1 into A 21
  6. On mixer, Set Channel 2 trim to +4 line level 9 o'clock, hard pan right, push fader up
  7. Put Main Mix Faders up to unity
  8. Patch Mixer Main L and R OUT into MBOX IN 1 and 2 to record to separate channels in Protools.
  9. Open DAW and set track 1 input to 1 mono, Set track 2 input to 2 mono.
  10. JK Audio Inline patch settings:

a. FROM PHONE; TURN DOWN ALL THE WAY B. SEPERATION: TURN UP ALL THE WAY C. FROM LINE: NOON D. SEND: UP ALL THE WAY E. SET TOGGLE TO OFF-HOOK MODE

MAKE THE CALL, AFTER THEY ANSWER, HANG UP THE PHONE AND USE THE MIC AND HEADPHONES.

TURN DOWN THE ROOM MONITORS.