Printing Booklets (Mac) - InDesign

From Help Wiki
Revision as of 13:35, 8 May 2013 by Wigpat08 (Talk | contribs)

The process of creating printer spreads from layout spreads is called imposition. It is generally easier to work in Layout Spread where the pages are ordered sequentially. Converting your project to a printer spread using InBooklet should be done just before you’re ready to print.

Tip: Remember when you’re creating a booklet Indesign will double the width of the document to fit two facing pages. If you’re final booklet prints to letter size (8.5” x 11”) you should set up your original layout spread for each page to be letter-half (5.5” x 8.5”).


Contents

InDesign on a Mac Computer

Step One: Once your document is open, go to File > Print Booklet...

200px.

Step Two: Under the Print Preset dropdown menu, select "Default."

Default printer.jpg

Step Three: Click the "Print Settings..." button at the bottom of the window.

Print settings.jpg

Step Four: Check to make sure that "ac_laser" is selected as your Printer.

Preferred printer.jpg

Step Five: Select the "Setup" menu. Check your paper size and page position.

Size paper type.jpg

Step Six: Select the "Marks and Bleed" menu. Check "Crop Marks" and set "Weight" to 0.25.

Markups and bleed.jpg

Step Seven: Click the "Printer..." button at the bottom of the window.(On Windows, press "OK," the next screen has the options)

Printer options.jpg

Step Eight: Open the Duplex Printing & Margin dropdown

Screen Shot 2013-05-08 at 11.23.39 AM.png

Step Nine: Click the Preview button at the bottom left of the window to check on your formatting.

Screen Shot 2013-05-08 at 11.23.39 AM.png

Step Ten: Double check that the preview looks how you want your booklet to print. If you're satisfied, click Print!

Preview.jpg


InDesign on a Windows Computer

Step One: Once your document is open, go to File > Print Booklet...

200px.

Step Two: Under the Print Preset dropdown menu, select "Default."

Step 2.jpg

Step Three: Click the "Print Settings..." button at the bottom of the window.

Step 3.jpg

Step Four: Check to make sure that "ac_laser" is selected as your Printer.

Step 4.jpg

Step Five: Select the "Setup" menu. Check your paper size and page position.

Step 5.jpg

Step Six: Select the "Marks and Bleed" menu. Check "Crop Marks" and set "Weight" to 0.25.

Step 6.jpg

Step Seven: Click the "Printer..." button at the bottom of the window.(On Windows, press "OK," the next screen has the options)

Step 7.jpg

Step Eight: Open the Duplex Printing & Margin drop down

Step Nine: Click the Preview button at the bottom left of the window to check on your formatting.

Step Ten: Double check that the preview looks how you want your booklet to print. If you're satisfied, click Print!