Difference between revisions of "Radio Practice and Politics - Mixing Benches"

From Help Wiki
(Created page with "==Setting Up Phone Interviews in the Mixing Benches== Category:2013-2014")
 
Line 1: Line 1:
 
==Setting Up Phone Interviews in the Mixing Benches==
 
==Setting Up Phone Interviews in the Mixing Benches==
 +
Both Mixing Benches have phones installed. The call-in # is listed on the top of the phone. For outgoing long distance calls please purchase a phone card in advance.
 +
 +
 +
===Mixer Setup===
 +
 +
 +
===Patchbay Setup===
 +
#Remove all existed patch cords from the patchbay.
 +
# Patch Phone Hybrid Out '''(C15)''' >  Mic/Line Input 2 '''(B16)''' .
 +
# Patch Aux Send 1 '''(A21)''' to Hybrid In '''(D15)''', this sends the local talent to the caller.
 +
 +
 +
 +
===Audacity Setup===
 +
Record directly into Audacity with the local speaker on the left channel, and the caller on the right.
 +
# Turn on the power switch on the desk.
 +
# Log in to the Computer
 +
# Create a project folder with your name in the Storage Drive.
 +
# Launch Audacity from the dock, and go to '''File > Save Project As''' , and save into the folder on the Storage Drive.
  
  
 
[[Category:2013-2014]]
 
[[Category:2013-2014]]

Revision as of 11:32, 13 February 2014

Setting Up Phone Interviews in the Mixing Benches

Both Mixing Benches have phones installed. The call-in # is listed on the top of the phone. For outgoing long distance calls please purchase a phone card in advance.


Mixer Setup

Patchbay Setup

  1. Remove all existed patch cords from the patchbay.
  2. Patch Phone Hybrid Out (C15) > Mic/Line Input 2 (B16) .
  3. Patch Aux Send 1 (A21) to Hybrid In (D15), this sends the local talent to the caller.


Audacity Setup

Record directly into Audacity with the local speaker on the left channel, and the caller on the right.

  1. Turn on the power switch on the desk.
  2. Log in to the Computer
  3. Create a project folder with your name in the Storage Drive.
  4. Launch Audacity from the dock, and go to File > Save Project As , and save into the folder on the Storage Drive.