Sem II 1105 Tiered Lecture

<pdf width="800" height="500">File:Cabinet1105.pdf</pdf>

Contact Media Services at X 6270 for media support. Unlock podium and touch AMX screen to start system

Podium Computer

1. Touch AMX screen to start system.
2. Press Computer then Podium Computer. This starts the projector and lowers the screen.
3. Pull out keyboard and mouse drawer.

Laptop Computer

1. Touch AMX screen to start system.
2. Press Computer then Laptop. This will start the projector and lower the screen.
3. Connect the VGA cord to your laptop.
4. Connect the ethernet cable to your laptop. Wireless is also available in 1105 rooms.
5. If you do not see your laptop image then restart the computer or check your mirroring/appearance settings in your control panel.

DVD

1. Touch the AMX screen in the podium to start the system.
2. Press Computer then Podium Computer. This starts the projector and lowers the screen.
3. Insert your DVD into the Mac Mini computer located on the podium.
4. Play your DVD through the system player, you can adjust volume through the keyboard or "AMX" screen.

VHS

1. Touch the AMX screen in the podium to start the system.
2. Select "Video" and press the selection "VHS."
3. Insert your VHS tape into the VCR deck inside the media cabinet near the lower entrance.
4. Press play to begin. You can adjust the volume through the "AMX" screen.

Document Camera

1. Roll out document camera drawer on the right of the podium.
2. Turn on the document camera.
3. Press Document Camera selection on the AMX touch screen. You should see your image on the monitor and projection screen.

Audio

1. Insert your Tape or CD in the decks located in the media cabinet.
2. Touch the AMX screen in the podium. Press Audio and select either CD or Tape.
3. Use the AMX touchscreen menu to control your volume.

Surround Sound

1. After you have selected your media source on the AMX screen then press surround sound.
2. Select what type of sound mode you want.
3. Press the Back button on the lower left of the AMX screen.

Shutdown Procedures

1. Select Power Off on the "AMX" touch screen.
2. The screen should show a loading bar of the projector cooling down

Return equipment and LOCK all locks