Difference between revisions of "Sem II 2105 Meeting Room"

From Help Wiki
(Powering The System)
Line 5: Line 5:
 
   
 
   
  
*Press '''Display Power''' button on the '''Media Control Panel''' to turn on the television. A green light will appear in the bottom right corner of the monitor to indicate that it is on. (This may take a few seconds)
+
# Press '''Display Power''' button on the '''Media Control Panel''' to turn on the television.  
*Press the input button on the '''Media Control Panel'''. This will allow you to select a source. An '''Input Source''' menu will appear on the top right corner of the screen. Use the '''Input''' button to scroll through the menu to select your source.
+
** A green light will appear in the bottom right corner of the monitor to indicate that it is on. (This may take a few seconds)
*For '''VHS/DVD''' select '''2AV'''.
+
# Press the input button on the '''Media Control Panel'''. This will allow you to select a source. An '''Input Source''' menu will appear on the top right corner of the screen. Use the '''Input''' button to scroll through the menu to select your source.
*For '''Laptops''' select '''3RGB'''.
+
# For '''VHS/DVD''' select '''2AV'''.
 +
# For '''Laptops''' select '''3RGB'''.
  
 
  If you are unable to get the TV to power on check the bottom side of the television. The is a large red button, press it and try powering on again.
 
  If you are unable to get the TV to power on check the bottom side of the television. The is a large red button, press it and try powering on again.

Revision as of 09:09, 27 September 2013

Powering The System

  1. Press Display Power button on the Media Control Panel to turn on the television.
    • A green light will appear in the bottom right corner of the monitor to indicate that it is on. (This may take a few seconds)
  1. Press the input button on the Media Control Panel. This will allow you to select a source. An Input Source menu will appear on the top right corner of the screen. Use the Input button to scroll through the menu to select your source.
  2. For VHS/DVD select 2AV.
  3. For Laptops select 3RGB.
If you are unable to get the TV to power on check the bottom side of the television. The is a large red button, press it and try powering on again.

VHS/DVD

  • Turn on the VHS/DVD deck.
  • Use the Remote or the buttons on the VHS/DVD deck to control viewing functions, or access menus.

Laptop

  • Connect the VGA cable to your Laptop (Mac user's will need a DVI to VGA adaptor)
  • If you need audio connect the Stereo Mini cable to the headphone jack on your laptop.
  • Turn on the laptop.
  • The laptop should now be prjecting on the television monitor.