Difference between revisions of "Sem II 2107 Seminar"

Revision as of 11:37, 18 October 2019

Contact the desk at X6270 for classroom support.

Projection

1. On the Switcher press the green Display Power button for 3 seconds to turn on the projector.
2. Press the Screen Down button to lower screen.

Laptop

1. Connect the VGA or HDMI cables hanging from the bottom of the rack into your laptop.
2. Use the ethernet cord to plug into the blue or green data jacks located around the room for internet access.
3. Press the VGA Laptop button for VGA or HDMI Laptop for the HDMI cable on the Switcher.
4. Turn on your laptop.

Video ( VCR & DVD)

1. Press the CD/DVD or VCR button on the Switcher.
2. Insert your media into the player.
3. Use the remote controls to use the VCR or DVD for menu options.
4. You may also use your Laptop disc drive to project DVDs. Follow instructions for connecting your laptop.

Audio

1. The DVD player is available to play CDs and you can also play audio through your laptop
2. Using the DVD player: select the CD/DVD button on the Switcher, insert your CD and play.
3. Using your laptop: Follow instructions to connect your laptop from above, choose the corresponding input on the the Switcher and play through the media player of your choice.

Shutdown Procedures

1. Turn off the Projector by holding the Display Power button for 3 seconds.
2. Press the Screen Up button to raise screen.
3. Turn off the rack power.

Troubleshooting:

No picture?:

- Does laptop have power?

- Is data projector turned on?

- Is VGA or HDMI cable connected to media control panel and laptop?

No audio?:

- Is room volume on media control panel turned up?

- Laptop: Is the volume on your laptop turned up and output source correctly selected?