Difference between revisions of "Sem II E4115 Critique"

Revision as of 16:15, 11 March 2016

<pdf width="800" height="500">File:4115.pdf</pdf>

Turn on MAIN POWER on both racks (orange switches, top right)

Computer

• Select the Screen Down button to lower the screen.
• Turn on the projector by pressing and holding the Display Power button for 3 seconds.
• Continue instructions depending on use of a VGA or HDMI cable

VGA (Wall Panel 1)

• Connect your laptop to the VGA cable.
• Use a Ethernet cable to connect to the data jacks (Blue and Green jacks) around the room.
• Select Wall Panel 1
• Turn on your laptop

HDMI (Wall Panel 2)

• Connect your laptop to the HDMI cable.
• Use a Ethernet cable to connect to the data jacks (Blue and Green jacks) around the room.
• Select Wall Panel 2
• Turn on your laptop

DVD/VHS

• Select the Screen Down button to lower the screen.
• Turn on the projector by pressing and holding the Display Power button for 3 seconds.
• Select the input CD/DVD or VHS on the switcher.
• Insert Media and press play. Navigate menus with remote.
• The volume knob is located at the upper right of the rack.

Using the Monitor

You can use the monitor to cue your DVD or VHS media

• Turn on the monitor.
• Select image source.
• Audio can be cued using the right and/or left channel by selecting the source number.

Troubleshooting:

No picture?:

- Does laptop have power?

- Is data projector turned on?

- Is VGA or HDMI cable connected to media control panel and laptop?

No audio?:

- Is room volume on media control panel turned up?

- Laptop: Is the volume on your laptop turned up and output source correctly selected?