Sem II E4115 Critique

From Help Wiki
Revision as of 15:26, 11 March 2016 by Loganj (Talk | contribs) (VGA (Input 7))

<pdf width="800" height="500">File:4115.pdf</pdf> Turn on MAIN POWER on both racks (orange switches, top right)

DVD/VHS

  • Select the Screen Down button to lower the screen.
  • Turn on the projector by pressing and holding the Display Power button for 3 seconds.
  • Select your input DVD or VHS
  • Insert Media and press play. Navigate menus with remote.
  • The volume knob is located at the upper right of the rack.

Computer

  • Select the Screen Down button to lower the screen.
  • Turn on the projector by pressing and holding the Display Power button for 3 seconds.
  • Continue instructions depending on use of a VGA or HDMI cable

VGA (Wall Panel 1)

  • Connect your laptop to the VGA cable.
  • Use a Ethernet cable to connect to the data jacks (Blue and Green jacks) around the room.
  • Select Wall Panel 1
  • Turn on your laptop

HDMI (Input 6)

  • Connect your laptop to the HDMI cable.
  • Use a Ethernet cable to connect to the data jacks (Blue and Green jacks) around the room.
  • Select Input 6
  • Turn on your laptop

Using the Monitor

You can use the monitor to cue your DVD or VHS media

  • Turn on the monitor.
  • Select image source.
  • Audio can be cued using the right and/or left channel by selecting the source number.

Troubleshooting:

No picture?:

- Does laptop have power?
- Is data projector turned on?
- Is VGA or HDMI cable connected to media control panel and laptop?

No audio?:

- Is room volume on media control panel turned up?
- Laptop: Is the volume on your laptop turned up and output source correctly selected?