Difference between revisions of "Sony PD-150/170 3CCD Mini DVCAM Camcorder Operating Guide"

From Help Wiki
Line 36: Line 36:
 
: C. Hold, maintain settings made manually.
 
: C. Hold, maintain settings made manually.
 
=====IRIS (Aperture)=====
 
=====IRIS (Aperture)=====
The Iris setting is to adjust depth of field and exposure. To adjust aperture make sure the '''AUTO LOCK''' switch is in the manual position the press '''IRIS''' and an indicator will appear on the viewfinder. Turn the '''IRIS''' dial to adjust aperture. To return to '''AUTO IRIS''', either set '''AUTO'''
+
The Iris setting is to adjust depth of field and exposure. To adjust aperture make sure the '''AUTO LOCK''' switch is in the manual position the press '''IRIS''' and an indicator will appear on the viewfinder. Turn the '''IRIS''' dial to adjust aperture. To return to '''AUTO IRIS''', either set '''AUTO LOCK''' to '''AUTO''' or press '''IRIS'''
 +
=====Shutter Speed=====
 +
Set the '''AUTO LOCK''' switch to the manual position. if the '''PROGRAM AE''' indicator is lit in the viewfinder, press the '''PROGRAM AE''' button repeatedly until the indicator disappears. Press the '''SHUTTER SPEED''' button. the shutter speed indicator appears in the viewfinder. Turn the '''SEL/PUSH EXEC''' dial to select the desired speed. the shutter speed ranges from 1/4 to 1/10000 of a second. To return to automatic shutter speed mode, set the '''AUTO LOCK''' selector to '''AUTO LOCK''', or press the '''SHUTTER SPEED''' button. The shutter speed indicator disappears from the viewfinder.
 +
: '''NOTE''': Slow shutter speeds require manual focus, and you can not use spotlight or digital effects with speeds less the 1/30th of a second.
 +
=====Gain=====
 +
To adjust gain set '''AUTO LOCK''' to the manual position and press '''GAIN''', gain indicator should appear in the viewfinder. Turn the '''SEL/PUSH EXEC''' dial to adjust the gain to the desired setting. To return to '''AUTO''' gain set the '''AUTO LOCK''' to ''' AUTO''' or press '''GAIN''' and the indicator should disappear.
 +
=====Adjusting White Balance=====
 +
Set the '''AUTO LOCK''' switch to the center position. Press the '''WHT BAL''' button, the white balance indicator appears in the viewfinder. Use the '''SEL/PUSH EXEC''' dial to the appropriate white balance mode: One-push (manual calibration), outdoor, or indoor. To use one-push manual adjustment mode the camera must be in standby. Fill the frame with a white object such as paper, and press '''SEL/PUSH EXEC''' dial. the indicator flashes rapidly, to indicate storage of the new white balance setting. The indicator stops flashing when white balance has been adjusted. To return to automatic adjustment, set the '''AUTO LOCK''' switch to '''AUTO LOCK''' or press the '''WHY BAL''' button. the indicator disappears from the viewfinder.
 +
=====Auto Exposure (AE) Shift=====
 +
To adjust exposure while using auto exposure, press the '''AE SHIFT''' button in standby, while recording or memory mode. the '''AE SHIFT''' indicator will appear on screen. Turn the '''SEL/PUSH EXEC''' dial to adjust the exposure. To turn '''AE SHIFT''' off, set it to 0 or press '''AE SHIFT'''.
 +
====Using the Fader/Overlap Function====
 +
=====To Fade In=====
 +
While in Standby, press the '''FADER''' button until the desired fader indicator flashes in the viewfinder. Press the '''START/STOP''' button; the shot will automatically fade in.
 +
=====To Fade Out=====
 +
While recording, press the '''FADER''' button repeatedly untildesired fader mode flashes in the Viewfinder. Press '''START/STOP''' button; the shot will automatically fade out.<br />
 +
 
 +
After the fade is completed, the camcorder returns to normal mode.<br />
 +
The fade modes are as follows:
 +
Fader, Monotone, Overlap*, Wipe*, Dot*, none
 +
::: *Fade in only
 +
 
  
 
[[Category:Media Loan]]
 
[[Category:Media Loan]]

Revision as of 10:10, 29 July 2013

A proficiency test is required to check these cameras out

Precautions

  • Avoid mechanical shock
  • Keep camcorder away from strong magnetic fields or mechanical vibration
  • Keep Power switch set to off when not in use
  • Do not get wet or use near water
  • Do not aim at the sun or other bright objects
  • Do not expose camcorder to extreme temperatures
  • Do not leave unattended (remember borrower is totally responsible for loss or damage)
  • Do not touch lens surface
  • Do not try to clean viewfinder or LCD panel
  • Do not lift or carry by viewfinder
  • Do not wrap up the camcorder and use, to prevent internal heat buildup
  • Do not force camera to accept tape make sure that there are no protruding labels on the tape.

Basic Operation

Supplying Power

Battery Pack

Lift up the Viewfinder and insert the battery pack with the downward arrow on the battery pack facing down. Slide the battery pack down until it clicks into place.

AC Adapter

Connect the AC adapter to a power outlet, then connect the camcorder and the AC power adapter using the supplied cord.

Charging the Battery

Supply power with the AC adapter while the battery is inserted, and leave the POWER switch set to OFF Approximate charging time for full battery: Normal battery 2.5 hours, Extended life battery 6.5 hours.

Cassette Insertion

Connect the camcorder to a power source and slide the EJECT button. the cassette compartment automatically opens. Insert a cassette with the write-protect tab facing upward and the window facing out, and gently press the PUSH button on the outside of the compartment until the door clicks shut.

NOTE: Use only DVCAM or Mini DV cassettes.

Record Mode

The PD 150/170 are capable of recording in both DVCAM and DVSP modes. While Evergreen supports both, other cameras do not. So if you plan on using a tape between this and any other cameras use DVSP mode.

Video Recording

First remove the hood cap. While pressing the green center button on the POWER switch. set it to CAMERA. Press the red START/STOP button to start recording. The REC indicator appears in the viewfinder and the red lamp indicator lights up in the front of the camcorder. Press the START/STOP button again to stop recording.

Manual Adjustments

For Iris, Shutter Speed, Gain and White Balance you must use the AUTO LOCK switch in the manual position.

AUTO LOCK Selection
A. Fully automatic settings.
B. Manual position, allows user to manually adjust settings.
C. Hold, maintain settings made manually.
IRIS (Aperture)

The Iris setting is to adjust depth of field and exposure. To adjust aperture make sure the AUTO LOCK switch is in the manual position the press IRIS and an indicator will appear on the viewfinder. Turn the IRIS dial to adjust aperture. To return to AUTO IRIS, either set AUTO LOCK to AUTO or press IRIS

Shutter Speed

Set the AUTO LOCK switch to the manual position. if the PROGRAM AE indicator is lit in the viewfinder, press the PROGRAM AE button repeatedly until the indicator disappears. Press the SHUTTER SPEED button. the shutter speed indicator appears in the viewfinder. Turn the SEL/PUSH EXEC dial to select the desired speed. the shutter speed ranges from 1/4 to 1/10000 of a second. To return to automatic shutter speed mode, set the AUTO LOCK selector to AUTO LOCK, or press the SHUTTER SPEED button. The shutter speed indicator disappears from the viewfinder.

NOTE: Slow shutter speeds require manual focus, and you can not use spotlight or digital effects with speeds less the 1/30th of a second.
Gain

To adjust gain set AUTO LOCK to the manual position and press GAIN, gain indicator should appear in the viewfinder. Turn the SEL/PUSH EXEC dial to adjust the gain to the desired setting. To return to AUTO gain set the AUTO LOCK to AUTO or press GAIN and the indicator should disappear.

Adjusting White Balance

Set the AUTO LOCK switch to the center position. Press the WHT BAL button, the white balance indicator appears in the viewfinder. Use the SEL/PUSH EXEC dial to the appropriate white balance mode: One-push (manual calibration), outdoor, or indoor. To use one-push manual adjustment mode the camera must be in standby. Fill the frame with a white object such as paper, and press SEL/PUSH EXEC dial. the indicator flashes rapidly, to indicate storage of the new white balance setting. The indicator stops flashing when white balance has been adjusted. To return to automatic adjustment, set the AUTO LOCK switch to AUTO LOCK or press the WHY BAL button. the indicator disappears from the viewfinder.

Auto Exposure (AE) Shift

To adjust exposure while using auto exposure, press the AE SHIFT button in standby, while recording or memory mode. the AE SHIFT indicator will appear on screen. Turn the SEL/PUSH EXEC dial to adjust the exposure. To turn AE SHIFT off, set it to 0 or press AE SHIFT.

Using the Fader/Overlap Function

To Fade In

While in Standby, press the FADER button until the desired fader indicator flashes in the viewfinder. Press the START/STOP button; the shot will automatically fade in.

To Fade Out

While recording, press the FADER button repeatedly untildesired fader mode flashes in the Viewfinder. Press START/STOP button; the shot will automatically fade out.

After the fade is completed, the camcorder returns to normal mode.
The fade modes are as follows: Fader, Monotone, Overlap*, Wipe*, Dot*, none

*Fade in only